Description:

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Engines

Kohler Command PRO CV224 Engines

With best-in-class power,* the all-new Command PRO CV224 is the ultimate engine for commercial walk-behind mowers.

Features include:

• Torque output: 11.0 ft-lbs
• 3-year limited commercial warranty
• Enjoy effortless starts thanks to our Easy-Pull™ technology
• Easy pours and less spilling with Accu-Fill® fuel tank’s 45% larger angled fuel neck
• Consistent-Cut™ technology maintains engine speed for a cleaner turf cut, even in tall, wet grass
• Cast-iron cylinder liners add durability and engine protection

Specifications:

Dimensions & Weight

• Length – Transport (handles in upright transport position): 41″ / 44″
• Length – Minimum (handles in highest operating position): 66″ / 69″
• Length – Maximum (handles in lowest operating position): 73.5″ / 76.5″
• Tracking Width: 28.75″
• Width (with discharge chute): 36.75″
• Width (with discharge block-off plate): 31.5″
• Height – Lowest Operating: 36.75″
• Height – Maximum Operating: 45.25″
• Height – Handle Bar in Storage Position: 57.5″
• Operating Weight – Bagging: 220 lbs. / 233 lbs.
• Operating Weight – Mulching: 214 lbs. / 227 lbs.
• Operating Weight – Discharging: 213 lbs. / 226 lbs.

General Specifications

• Total Fuel Capacity: 1 gallon (0.37 gallon capacity for California models)
• Rear Tires: 10.5″ x 3″ rubber tire with glass-filled polypropylene wheel
• Front Tires: 9″ x 2.25″ rubber tire with glass-filled polypropylene wheel

Drive System

• Drive System Type: GT MV 702 Transmission
• Forward Ground Speed: Up to 4 mph
• Parking Brake: Hand lever

Deck Specifications

• Cutting Width: 30″
• Deck Type: Extra-strong, fully fabricated and welded steel cutter deck with offset blade, non-timed deck setup
• Cutting Height: 1.5″ to 5″ in 0.25″ increments
• Blade Type: Optimized for maximum performance in discharging, mulching, or bagging
• Deck Lift: Hand lever, single-point adjustment
• Construction: 14-gauge, Grade 100 Military Steel deck shell with 12-gauge spindle reinforcement plate and ¼” trim side reinforcement bar for extra impact protection
• Spindles: Aluminum housing with sealed ball bearings
• Blade Engagement: Blade brake clutch (allows disengagement of cutter blades without shutting off the machine)

Discharge, Mulch, & Bagging

• Standard Discharge, Mulch, & Bagging: Yes
• Bag Capacity: 2.5 Bushels

Width	Weight	Height	Length
0 Inch	0 Gram	0 Inch	0 Inch

Description:

All business—even at home—the Freedom Z® is perfect for landscapers needing a machine that can go the distance or for the pro-at-home who owns a large-acreage lot. Commercial-quality through and through, this machine is comfortable anywhere the job needs to be done.

STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE

The Ogura GT1 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 74 ft. lb. of holding strength, and an adjustable air gap for long life.

Specifications:

GENERAL

• Total Fuel Capacity: 6.5 gallons
• Drive Tires: 20″ x 10″-10″
• Caster Tires: 11″ x 6″-5″
• Seat: Padded with arm rests, adjustment forward and back (tools required)

DRIVE SYSTEM

• Drive System Type: Hydro-Gear ZT2800 Transaxle
• Pumps: Internal Pump - 10 cc
• Motors: Internal Motor - 16 cc
• Forward Ground Speed: 8 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand-activated lever

DECK

• Cutting Widths: Available in 48″ and 52″
• Type: Hero Cutter Deck
• Cutting Height: Adjustable from 1.5″ to 4.5″ in .25″ increments
• Deck Lift: Foot-operated pedal
• Construction: Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
• Spindles: Aluminum housing with sealed ball bearings.
• Blade Engagement: Ogura GT1 (74 ft lb) Adjustable air-gap for extended life.

Product Dimensions

• 48″ Freedom Z
• Length: 73″
• Width (chute down): 60.5″
• Width (chute in transport position): 49″
• Height: 60″
• Weight: 745 lbs
• 52″ Freedom Z
• Length: 73″
• Width (chute down): 64.5″
• Width (chute in transport position): 53″
• Height: 60″
• Weight: 765 lbs

Width	Weight	Height	Length
0 Inch	0 Gram	0 Inch	0 Inch

Description:

Featuring a comfortable operator platform with first-class suspension that minimizes fatigue, the V-Ride II™ delivers a natural, intuitive and smooth riding position the entire day. With unrivaled performance, stability and durability, this machine helps keep you in tip-top condition to get the job done day after day, year after year.

Features:

TRI-PLATE DECK TOPS:

Super-rigid Tri-Plate deck construction results in a nearly 1/2" thick (0.485") steel cutter deck top (most zero-turn rider models).

FRONT BAFFLE CHAMBER:

Special front baffle chamber allows the grass to be lifted up before the blade cuts it. No stragglers.

WEAR PAD:

Replaceable trim-side wear pad protects the deck and landscaping from scraping and impact damage.

Specifications:

Fuel Capacity

• 32" Model: 5 gallons
• 36" Model: 6.75 gallons
• 48", 52", and 61" Models: 8 gallons

Tires

• Drive Tires:
• 32" Model: 20" x 6.5"-10"
• 36" Model: 20" x 8"-10"
• 48" and 52" Models: 24" x 9.5"-12"
• 61" Model: 24" x 12"-12"
• Caster Tires:
• 32" and 36" Models: 11" x 4"-5"
• 48" and 52" Models: 13" x 5"-6"
• 61" Model: 13" x 6.5"-6"

Seat

• Extra-large comfort cushion

Drive System

• Drive System Type: Dual Pump and Motor
• Pumps:
• 32" and 36" Models: Hydro-Gear 10 cc
• 48", 52", and 61" Models: Hydro-Gear 12 cc
• Motors:
• 32" and 36" Models: Parker 12 ci
• 48", 52", and 61" Models: Parker 14 ci
• Forward Ground Speed:
• 32" and 36" Models: 8.5 mph
• 48", 52", and 61" Models: 10.5 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever

Deck

• Cutting Widths: 32", 36", 48", 52", and 61"
• Type:
• 32" and 36" Models: Advantage
• 48", 52", and 61" Models: Velocity Plus™
• Cutting Height: 1.5" to 4.5" in 0.25" increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel, with reinforcement plates at cutter deck spindles.
• 32" Model: Dual-plate construction
• Spindles: Cast-iron housing with tapered roller bearings
• Blade Engagement:
• 32", 36", 48", and 52" Models: Ogura GT2.5 (150 ft lb)
• 61" Model: Ogura GT3.5 (250 ft lb) with adjustable air-gap for extended life

Width	Weight	Height	Length
0 Inch	832 Pounds	0 Inch	0 Inch

Description:

THE REAL DEAL FOR SERIOUS CHEMICAL APPLICATIONS

Looking to expand your lawn care offers? The Turf Storm XL and Turf Storm are ready to help you handle any job. With a 220-lb spreader capacity, 60-gallon sprayer capacity and an 8-ft spray boom, the Turf Storm XL can handle even the largest jobs. Conversely, the Turf Storm, with its 120-lb spreader capacity and 30-gallon sprayer capacity, is ideal for working on smaller residential properties. And, its 35.5-inch width (65-inch boom folded in) lets it fit through any standard gate. A 75-foot hose reel (Turf Storm XL) or 15-foot hose reel (Turf Storm) allows you to reach tough spaces.

Features:

Dual Liquid Tanks

• Capacity: Turf Storm XL has a 60-gallon capacity, while Turf Storm has a 30-gallon capacity.
• Measurement Indicators: Highly translucent tanks with raised indicators for accurate fill levels.
• Spray Booms: Turf Storm XL features 8-feet-wide booms with five nozzles, allowing for spraying widths of 2, 6, 8, or 10 feet. Turf Storm has a 65-inch wide spray boom, offering spraying widths of 2, 6, or 8 feet.
• Hose Reel: Turf Storm XL includes a 75-foot hose reel, while Turf Storm has a 15-foot flex hose, enabling access to tough spaces.

Spread up to 25 Feet

• Hopper Capacity: Turf Storm XL has a 220-pound dry/granular capacity, and Turf Storm has a 120-pound capacity.
• Spreader Motor: High-torque electric spreader motor facilitates up to a 25-foot spread width.

Wide Stance for Optimum Maneuverability and Stability

• Dynamically Balanced: Ensures stable footing without the need for locking front casters (Turf Storm XL only).

Ease of Use and Maintenance

• Drain Plug: Quick and efficient drain plugs at the lowest part of the tanks for easy draining and cleaning.

More Accurate Application Pattern

• Spreader Motor: High-torque electric motor reduces system heat, allowing for more precise control and accurate application.

Finger Tip Controls

• Operator Control Station: Ergonomic design with drive control lever for intuitive operation; all controls within easy reach.

Maximize Comfort

• Operator Platform: Spacious platform with extra-large comfort cushion and coil-spring suspension for a smooth ride.

23hp Vanguard Engine

• Power: 23 horsepower Briggs Vanguard® engine provides ample power, efficiency, and reliable performance.
• Charging System: 50-amp system ensures dependable operation of accessories like pumps, lights, and foam markers.

Easy Access

• Maintenance: Removable cushion and open lower area facilitate quick access to hydro drive pumps, reservoir, and mechanical components for easy servicing.

Specification:

Engine

• Engine: Briggs Vanguard™
• Horsepower: 23 hp
• Charging System: 12 Volt, 50 Amp

Fuel Capacity

• Total Fuel Capacity: 4.5 gallons

Wheels

• Front Wheel(s): 16″ x 6.5″-8″, pneumatic
• Rear Wheels: 20″ x 7″-10″, 4-ply

Currently Available Accessories

• Foamer Kit
• LED Light Kit
• 7 GPM pump

Drive System

• Drive System: Dual Pump and Motor
• Pumps: Hydro-Gear: PG Series 10 cc
• Motors: Parker TG Series: 14.5ci

Performance

• Ground Speed:
• Up to 8.5 MPH forward
• Up to 5 MPH reverse
• Parking Brake: Hand Lever

Dimensions

• Length: 65″
• Width (spray booms in): 35.5″
• Width (spray booms out): 65″
• Height: 50″

Weight

• Dry Weight: 859 lb

Warranty

• Warranty: 2-Year Commercial & Non-Commercial Warranty; 90-day Rental

Width	Weight	Height	Length
0 Inch	859 Pounds	50 Inch	65 Inch

An indispensable tool for the serious landscape chemical applicator or those looking to expand their offerings, the Turf Storm™ is built Scag® tough to treat large properties or residential lawns. Offering liquid and dry capacities for maximum productivity and profitability, the Turf Storm helps create better turf more efficiently than ever before.

Width	Weight	Height	Length
0 Inch	220 Pounds	0 Inch	0 Inch

Description:

It’s time for you to rise to the top of the food chain and tame turf with the Turf Tiger II™, a machine that’s tougher than any job you can throw at it. Engineered for superior durability, productivity and comfort, the Turf Tiger II gives you the edge over whatever nature throws at you while leaving you ready to take on the next challenge.61" Velocity Plus' Cutter Deck, 40 HP Briggs Vanguard' BIG BLOCK' EFI – electronic fuel injection Features may include: Velocity Plus Cutter Decks 52", 61" OR 72" CUTTING WIDTH The envy of the industry, Velocity Plus' decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing. Driveshaft-Driven Cutter Decks ANOTHER REASON THE TURF TIGER IS KING OF THE JUNGLE. A driveshaft connects the engine to the deck, eliminating the long belt drive and increasing cutting-height range. Heavy-Duty, Double-Tube Steel Main Frame SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE The Turf Tiger' is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.

Width	Weight	Height	Length
0 Inch	0 Pound	0 Inch	0 Inch

The envy of the neighborhood - 52", 61" or 72" Cutting Width: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag's ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing. Heavy-Duty, Double-Tube Steel Main Frame - Solid Design for Years of Dependable Service: The Turf Tiger™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment. Powerful and Efficient Engine Options - Huge Power, Up To 40 HP: Choose from a Kawasaki®, or Briggs Vanguard™ engine; air-cooled or liquid-cooled; electronic fuel injection (EFI) or digital fuel injection (DFI) options. Diesel (Kubota) and propane (Kohler) options are also available.

Width	Weight	Height	Length
0 Inch	1600 Pounds	0 Inch	0 Inch

Description:

61" Velocity Plus™ Cutter Deck, 40 HP Briggs Vanguard™ BIG BLOCK™ EFI - electronic fuel injection

FEATURES

• The envy of the neighborhood - 48", 52" or 61" Cutting Width: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge on 48", 52" and 61" widths. An Advantage Cutter Deck is featured on 32" and 36" widths.
• Adjustable Operator Platform - Experience an Unmatched, Ultra-Comfortable Ride: The spacious operator platform delivers a smooth ride and reduces operator fatigue. Adjustable suspension spring can be moved forward or backward, with, or without, the spacer plate installed to meet the operator's comfort preference. Extra-large, extra-thick operator comfort cushion ensures comfortable operation, hour after hour.
• Cutter-Deck Lift System - Convenient, Spring-Assisted Lever: Cutter deck can be lifted and locked into transport position from the operator's station. Cutting heights are easily set by placing the tethered pin at the desired height.
• Ogura PTO Clutch Brake - Strong, Adjustable Clutch for Long Life: Provides excellent starting and stopping power for the cutter deck and an adjustable air gap for long life.
• Ease of Maintenance - More Uptime: Easy-to-remove covers, an unrestricted engine compartment, easy-to-reach grease Zerks and many more features make servicing the V-Ride™ II simple, so you can be in the shop less and on the job more.

SPECIFICATIONS

• Description: 61" Velocity Plus™ Cutter Deck, 40 HP Briggs Vanguard™ BIG BLOCK™ EFI - electronic fuel injection
• Total Fuel Capacity: 5 gallons (32"); 6.75 gallons (36"); 8 gallons (48", 52", and 61")
• Drive Tires: 20" x 6.5"-10" (32"); 20" x 8"-10" (36"); 24" x 9.5"-12" (48" and 52"); 24" x 12"-12" (61")
• Caster Tires: 11" x 4"-5" (32" and 36"); 13" x 5"-6" (48" and 52"); 13" x 6.5"-6" (61")
• Seat: Extra-large comfort cushion
• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear 10 cc (32" and 36"); Hydro-Gear 12 cc (48", 52", and 61")
• Motors: Parker 12 ci (32" and 36"); Parker 14 ci (48", 52" and 61")
• Forward Ground Speed: 8.5 mph (32" and 36"); 10.5 mph (48", 52" and 61")
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever
• Cutting Widths: 32", 36", 48", 52" and 61"
• Type: Advantage (32" and 36"); Velocity Plus™ (48", 52", and 61")
• Cutting Height: 1.5" to 4.5" in .25" increments
• Deck Lift: Hand lever
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.; 32" model features dual-plate.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement: Ogura GT2.5 (150 ft lb) - (32", 36", 48" and 52"); Ogura GT3.5 (250 ft lb) - (61"); Adjustable air-gap for extended life.

DIMENSIONS

• Length: 72.75"
• Tracking Width: 48"
• Width (chute down): 73.5"
• Width (chute in transport position): 62.75"
• Height: 47.25"
• Weight: 1,127-1,173 lb

ACCESSORIES

• 2-Bag V-Ride II Spindle Driven Grass Catcher
• Fabric Bag Grass Catcher
• Hurricane Mulch System
• Hurricane Plus™ Mulch System
• Mulch Plate
• OCDC - Operator-Controlled Discharge Chute
• Light Kit
• Chrome Wheel Covers
• Air Filter Monitor
• Blade Buddy
• 12-Volt Accessory Outlet

Width	Weight	Height	Length
0 Inch	0 Gram	0 Inch	0 Inch

Scag Zero-Turn Mowers, Stand-On Mowers, and Walk-Behind Mowers are some of the best built lawn mowers available for commercial landscapers, ranchers, and homeowners with acreage. Launched in 1983 in Mayville, Wisconsin, the Scag brand continues today with popular Scag equipment series names like Scag Turf Tiger, Cheetah, Tiger Cat, Patriot, Freedom Z, and Liberty Z Zero-Turn Mowers, as well as the V-Ride Stand-On Mower. As an Authorized Service Center for Scag outdoor power equipment, we offer Scag Warranty repair services as well as Genuine Scag repair parts. Walk-Behind Mowers include blade, reel and string mowers. We do list the Staris Stand On Mower here as well. While we attempt to ensure display of current prices and accurate data, sales and specials listings may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult our sales personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.

Width	Weight	Height	Length
0 Inch	0 Pound	0 Inch	0 Inch

Description:

The new V-Ride™ II stands as a testament to Scag's commitment to excellence. Easy to operate, ready to conquer any terrain, and built to last, this stand-on mower redefines performance and comfort.

Features:

1. Ultra Compact and Agile: Despite its compact size, the V-Ride™ II offers exceptional agility, comfort, and stability. It combines the speed and comfort of a rider with the space-saving convenience of a walk-behind mower.
2. Full-Sized Features: The V-Ride™ II is packed with full-sized features, including a dual hydraulic pump dual wheel motor drive system, coil-suspension platform, and a heavy-duty steel main frame, ensuring durability and performance.
3. Engine Options: Choose from powerful Kawasaki FX, Kawasaki FS, or Kohler EFI commercial-grade engines to suit your specific needs and preferences.
4. Deck Options: Available with a 36" Advantage™ or a 48", 52", or 61" Velocity Plus™ deck, delivering immaculate quality-of-cut and performance.
5. Productivity: With forward speeds of up to 10.5 MPH (on 48", 52", & 61" models) and up to 5 MPH reverse speeds, productivity is maximized. The 36" model offers speeds of up to 8.5 MPH forward.
6. Operator Comfort: The spacious operator platform with coil suspension provides a smooth ride, reducing operator fatigue. The wide platform, made from heavy-gauge steel with an extruded star pattern, ensures no-slip footing.
7. Engine Options: Kawasaki FX series engines feature commercial-grade canister air filters and twin barrel carburetors, while Kawasaki FS engines boast dual element air filters and single barrel carburetors. The Kohler EFI engine offers electronic fuel injection for easy starting and increased fuel efficiency.
8. Main Frame Construction: The Scag tough main frame construction delivers solid strength and ensures years of trouble-free service, designed for longevity and durability.

The V-Ride™ II is available in several model configurations to fit a wide range of professional lawn maintenance needs, making it the ultimate stand-on mower with unmatched handling, stability, and quality. Experience the Scag difference today by contacting your local dealer for a demonstration.

Width	Weight	Height	Length
0 Inch	1015 Pounds	0 Inch	0 Inch

Description:

The description highlights several key features of the mower:

1. Starting and Stopping Power: The mower provides excellent starting and stopping power for the cutter deck, ensuring efficient operation and longevity. The adjustable air gap contributes to the mower's long life.
2. Spacious Operator Platform: Designed for operator comfort, the spacious platform delivers a smooth ride and reduces operator fatigue. The adjustable suspension spring can be customized to meet the operator's comfort preferences, with or without the spacer plate installed.
3. Operator Comfort: An extra-large and extra-thick operator comfort cushion ensures comfortable operation, even during extended use. This feature enhances operator productivity and reduces fatigue over long hours of mowing.
4. Deck Quality and Discharge: The Velocity Plus decks, available in 48", 52", and 61" widths, are considered the envy of the industry. They deliver an exceptional quality-of-cut and ensure a wide, even discharge of grass clippings. For 32" and 36" widths, an Advantage Cutter Deck is featured, maintaining consistent quality across different deck sizes.

Overall, these features contribute to the mower's reputation for providing outstanding performance, comfort, and durability, making it a top choice for professional lawn maintenance.

Width	Weight	Height	Length
0 Inch	0 Pound	0 Inch	0 Inch

Description:

52" Velocity Plus Stand-On Lawn Mower w/ 37 hp Briggs Vanguard EFI EngineFeaturing a comfortable operator platform with first-class suspension that minimizes fatigue, the V-Ride II™ delivers a natural, intuitive and smooth riding position the entire day. With unrivaled performance, stability and durability, this machine helps keep you in tip-top condition to get the job done day after day, year after year.

Width	Weight	Height	Length
0 Inch	0 Pound	0 Inch	0 Inch

Description:

COME HOME TO THE BEST

Because every home deserves stripes, the Liberty® Z is designed and manufactured to deliver a top-of-the-line experience at a homeowner price point. A professionally-constructed mower, fit for your own lawn. The Liberty Z gives more people the chance to see why Scag® machines are Simply the Best.

Features:

Ogura PTO Clutch Brake

• Strong and Adjustable Clutch: The Ogura GT1 PTO Clutch Brake delivers 74 ft. lb. of holding strength, with an adjustable air gap for extended longevity. It provides excellent starting and stopping power for the cutter deck.

Command Perfection

• Deep Fabricated Cutter Decks: The heavy-duty Hero Cutter Deck design ensures superior quality-of-cut. Its deep construction efficiently manages tall grass even at higher speeds, supported by heavy-duty aluminum sealed ball bearing blade-drive spindles for reliable season-to-season performance.

High-Strength Steel Frame

• Solid Construction: Built with a tubular-steel main frame for unmatched strength and durability, ensuring years of dependable service.

Low-Maintenance Design

• Increased Uptime: Fewer grease points enhance operator convenience and ease-of-ownership, reducing maintenance intervals.

Proven Transaxles

• Smooth Power Delivery: Equipped with dual hydro transaxles (Tuff Torq TZ450, Hydro-Gear ZT-2800, or ZT-3100 depending on model) for smooth and powerful performance to the drive wheels, supporting speeds up to 7 mph.

Contoured High-Back Seat

• Comfortable Operation: Features an ultra-comfortable, adjustable seat with armrests (standard on larger models, optional on smaller models) for improved comfort during extended use.

Easy Foot-Pedal Deck Lift

• Effortless Deck Adjustment: Spring-assisted foot-pedal deck lift mechanism ensures smooth and easy raising and lowering of the cutter deck.

Powerful Engine Options

• Reliable Power: Offers a variety of proven air-cooled V-twin engine options, delivering up to 27 HP to tackle tough mowing tasks efficiently.

Specification:

• Total Fuel Capacity: 3.5 gallons
• Drive Tires: 20" x 8"-10"
• Caster Tires: 11" x 4"-5"
• Seat: Optional armrest kit available (armrests not included by default)
• Drive System Type: Hydro-Gear ZT-2800 Transaxle
• Pumps: Internal Pump: 10 cc
• Motors: Internal Motor: 10 cc (Tuff Torq)
• Forward Ground Speed: 7 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Hand lever
• Cutting Width: 36"
• Cutting Height: 1.5" to 4.5" in 0.25" increments
• Deck Lift: Foot-operated pedal
• Deck Construction: Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles.
• Spindles: Aluminum housing with sealed ball bearings.
• Blade Engagement: Ogura GT1 (74 ft lb) – adjustable air-gap for extended life
• Product Dimensions:
• Length: 68.5"
• Width (chute down): 48.5"
• Width (chute in transport position): 37"
• Height: 40"
• Engine: 18 HP Kawasaki® FR600V – V-Twin, air-cooled engine, 603 cc displacement
• Weight: 555 lb

Width	Weight	Height	Length
48.5 Inch	555 Pounds	40 Inch	68.5 Inch

The Scag Liberty Z ® is specifically designed for the home owner that wants a high-quality mower but does not need a large, commercial-grade unit. Now, there is no need to take a step down and buy a big box, throw away mower. Now, you can buy something that will last, and perform at a very high level. The Liberty Z is designed, manufactured and assembled Scag tough, just like every other Scag product. It has a strong, fully fabricated (bent and welded, not stamped) cutter deck that is designed to last a long time, and deliver a beautiful cut. There are self-adjusting belts and sealed bearings throughout the mower to minimize maintenance.Unique Features & Description: Engine Manufacturer: Kawasaki Horse Power: 21 hp Engine Type: FR651 Series Displacement: 726 cc Transmission: Hydro-Gear ZT2800 Transaxle Wheel Size: 20 in. x 10 in.-8 in. Fuel Capacity: 5.5 gal. Deck Size: 48 in

Width	Weight	Height	Length
0 Inch	0 Pound	0 Inch	0 Inch

Description:

The power of a tiger with the swiftness of a cat, the nimble Tiger Cat® II combines the best of both worlds. Making full use of its compact footprint and robust engine, this easily adjustable and extremely durable machine gets into, around and out of tight spaces quickly—putting you on the path toward increased profitability.

61" Cutting Width

The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.

Engine

The Briggs & Stratton® Vanguard® BIG BLOCK™ engine found on select Scag® mower models is a proven performer with power and reliability. Features include:

• V-Twin OHV technology.
• Dura-Bore cast-iron cylinder sleeve.
• Full-pressure lubrication with spin-on oil filter.
• Oil cooler.
• Advanced debris management.
• Centrally located oil pump and pickup.
• Heavy-duty cylinder and sump.
• High-efficiency head design.
• Dynamically balanced crankshaft.
• Industrial-grade solenoid shift starter.

Specification:

Product Dimensions (61″ Tiger Cat):

• Length: 80″
• Width (chute down): 73.5″
• Width (chute in transport position): 62.75″
• Height (ROPS folded): 46.75″
• Height (ROPS up): 67.25″
• Weight: 1,257–1,277 lb

General:

• Total Fuel Capacity: 9.5 gallons
• Drive Tires: 24″ x 12″-12″
• Caster Tires: 13″ x 6.5″-6″, flat-free
• Seat: 4-point iso-mounted mid-back seat on operator-suspension platform

Drive System:

• Type: Dual Pump and Motor
• Pumps: Hydro-Gear 12 cc
• Motors: Parker 14.5 ci
• Forward Ground Speed: 12 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Foot-operated pedal

Deck:

• Cutting Width: 61″
• Type: Velocity Plus™
• Cutting Height: 1″ to 5″ (adjustable in 0.25″ increments)
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck made of 3 steel plates totaling nearly 1/2″ thick, with reinforcement plates at cutter deck spindles
• Spindles: Cast-iron housing with tapered roller bearings.

Width	Weight	Height	Length
			0 Inch

Description:

The power of a tiger with the swiftness of a cat, the nimble Tiger Cat® II combines the best of both worlds. Making full use of its compact footprint and robust engine, this easily adjustable and extremely durable machine gets into, around and out of tight spaces quickly—putting you on the path toward increased profitability.

Specifications:

Engine:

The new Kawasaki® FT Series engines with patented Vortical air filtration blaze new trails.

Kawasaki® FT Series engines are designed and built to handle heavy loads. The Vortical air filtration system muscles out grass and debris while large, easy-to-access integrated clean-out ports amp up your efficiency and keep you cutting.

Other features include:

• 90° V-twin
• High-efficiency, centrifugal air intake system
• Dual-element air filtration with reinforced filter
• Large, easy-to-access integrated clean-out ports
• Pressurized lubrication system
• Electronic spark ignition
• Automatic compression release
• Internally vented carburetor with fuel shut-off solenoid
• Cast-iron cylinder liners

Specs:

• Model: STCII-52V-26FT-EFI
• Deck Width: 52″
• Deck Type: Velocity Plus™ Cutter Deck
• Engine Output: 26 HP
• Engine Brand: Kawasaki®
• Engine Series: FT Series with electronic fuel injection (EFI)

Width	Weight	Height	Length
0 Inch	0 Gram	0 Inch	0 Inch