Description:

The SCAG 901T is a 12 bushel, clamshell design, spindle-driven grass catcher specifically made for Scag's Tiger Cat, Cheetah, and Turf Tiger zero-turn riding mowers with Velocity Decks. Here's a breakdown of its key features:

• Capacity: 12 bushels - This translates to a large capacity for collecting grass clippings before needing to empty.
• Clamshell Design: This allows for easy loading and unloading of grass clippings.
• Spindle-Driven: The grass catcher is powered by the mower's spindle, eliminating the need for a separate motor or battery.
• Compatibility: Fits Scag Tiger Cat, Cheetah, and Turf Tiger zero-turn riding mowers with Velocity Decks. (Important Note: Before purchasing, double-check your mower's model and deck information to ensure compatibility).
• Installation Kit Required: The 901T grass catcher does not include the installation kit needed for attachment.

In summary, the SCAG 901T is a high-capacity grass catcher designed for specific Scag zero-turn mowers. Its clamshell design and spindle-powered operation offer convenience and ease of use. Remember to verify compatibility with your mower model and deck before purchasing.

Description:

61" Velocity Plus™ Cutter Deck, 38 HP Kawasaki® FX Series EFI - electronic fuel injection

FEATURES

The envy of the neighborhood - 61" or 72" Cutting Width: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag's ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing. Ogura PTO Clutch Brake - Strong, Adjustable Clutch for Long Life: The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life. Hydro-Gear ZT-5400 Transaxles - Speeds Up To 16 MPH!: Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle's design greatly reduces hoses and possible leak points. Heavy-Duty, Double-Tube Steel Main Frame - Solid Design for Years of Dependable Service: The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment. 12-Volt Outlet - Keep Your Device Charged and Ready: 12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge. Ease of Maintenance - More Uptime: Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more. Powerful and Efficient Engine Options - Huge Power, Up To 38 HP: Choose either a powerful, 38HP Kawasaki® or 37HP Briggs Vanguard™ air-cooled; electronic fuel injection (EFI) engine. Rear-Discharge model features 31HP Kawasaki FX engine. Tiger Eye Advanced Monitoring System - Keep a Real-Time "Eye" on Important System Functions: Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator's seat. Cheetah II Operator Suspension System - Unparalleled Comfort: With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it's needed, and only where it's needed. The seat's 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.

SPECIFICATIONS Description:

61" Velocity Plus™ Cutter Deck, 38 HP Kawasaki® FX Series EFI - electronic fuel injection Total Fuel Capacity: 13 gallons Drive Tires: 24" x 12"-12" Caster Tires: 13" x 6.5"-6" Seat: 4-point iso-mounted mid-back mounted on operator-suspension platform Drive System Type: Hydro-Gear ZT5400 Transaxle. Two-Speed Pumps: Internal Pump: 16 cc Motors: Internal Motor: 21 cc Forward Ground Speed: 16 mph (high-speed); 12 mph (low-speed) Reverse Ground Speed: 8 mph (high-speed); 5 mph (low-speed) Parking Brake: Foot-operated pedal Cutting Widths: 61" and 72" Type: Velocity Plus™ Cutting Height: 1.25" to 5" in .25" increments Deck Lift: Adjustable foot-operated pedal Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles. Spindles: Cast-iron housing with tapered roller bearings. Blade Engagement: Ogura GT5 (350 ft lb); Adjustable air-gap for extended life.

DIMENSIONS

Length: 85.5" Width (chute down): 73.5" Width (chute in transport position): 62.75" Height (ROPS folded): 49.5" Height (ROPS up): 67" Weight: 1,364-1,392 lb

ACCESSORIES

Clam-Shell Grass Catcher 3-Bag Grass Catcher Hurricane Plus™ Mulch System Mulch Plate OCDC - Operator-Controlled Discharge Chute Tiger Stripe Kit Trailer Hitch Chrome Wheel Covers Air Filter Monitor Blade Buddy

Description:

After the initial installation, the entire 3-Bag Grass Catcher (GC-3B) assembly can be removed and reinstalled in just minutes without any tools. Just pull three quick-pins, release the belt and lift it off. A 16-bushel capacity hopper collects debris from a blower that pulverizes the debris, reducing particle size and increasing the density inside the bags.

What does this mean to you? Shredding the debris allows you to pack from 50% to over 100% more into the same amount of space when compared to other grass catchers on the market. Simply put, you will be able to bag more debris before you have to stop and empty the bags. That saves time and greatly increases productivity. See your Scag® Dealer today to get your hands on this incredible catcher system.

NOTE: The 3-Bag Grass Catcher fits most 2002 and newer models (only those with Velocity Plus™ Cutter Decks) and is not available for 72″ models. Grass catchers are not compatible with propane and dual-fuel models.

Description:

Aeration is vitally important for healthy turf, and it’s also an opportunity to expand your services. A new tool to tackle aeration with more efficiency, the stand-on AerStorm™ aerator allows you to get more done than ever before. Designed and engineered for long-lasting durability, improved productivity and all-day comfort, it’s time to take on your next challenge with the next generation of aeration.

Features:

• Quick and Simple Aeration
• Depth Adjustment and Engagement Achieve precise aerating depths effortlessly with a user-friendly depth selection pin. Adjust from 1” to 4” in 1/2” increments using the easy-grip rubber knob, catering to specific property needs. Hydraulic tine engagement, activated by a foot switch, enhances productivity and safety by keeping hands on the controls.
• Drive Control Levers Navigate with ease using ergonomic drive control levers, maximizing maneuverability and operational efficiency.
• Intuitive Instrument Panel Stay informed with a comprehensive instrument panel that provides clear visibility of operational metrics and status updates.
• Operator Platform Enjoy a comfortable, smooth ride with a spacious operator platform featuring suspension and a padded, bolstered cushion for extended comfort during prolonged use.
• Ease of Maintenance Minimize downtime with quick-access maintenance features including a removable cushion and lower panel for easy service access to the hydro tank and tines.
• Heavy-Duty Frame Built to last with a robust, heavy-duty frame ensuring dependable performance and longevity, ideal for sustained productivity.
• Powerful Engine Equipped with a 23 hp Kohler® Command Pro® engine, delivering substantial power, efficiency, and reliable performance for demanding applications.

Specification:

Engine Specification

• General Type: Heavy-duty industrial/commercial
• Brand: Kohler Command Pro
• Model: CV732
• Horsepower: 23.5 HP @ 3600 RPM
• Torque: 40.3 ft-lbs. (peak)
• Type: 4 cycle gas, twin-cylinder, air-cooled, OHV, vertical shaft engine
• Displacement: 747 cc (45.6 cubic inch)
• Cylinders: 2 cast-iron sleeves
• Governor: Mechanical type governor with variable speed control set at 3600 rpm (±100 rpm), idle set at 1800 rpm (±150 rpm)
• Air Intake Group: Large capacity 2-stage canister air filter
• Exhaust Group: Single exhaust canister muffler
• Fuel Pump Group: Integral fuel pump with inline fuel filter, internal fuel line vent; float feed; two barrel, adjustable idle, afterfire solenoid.
• Oil Pump Group: Full pressure lube, with full-flow filter, 2 quart oil capacity
• Starter/Electrical/Charging System: 12 volt "maintenance-free" sealed battery with alternator, solid state ignition with key start. 15 amp charging system, regulated.

Engine Deck

• Thickness: 1/4" steel
• Fuel Tank: 5.5 gallon (20.8 liters) tank with molded-in cup holder

Drive System

• Type: Hydro drive with two variable displacement pumps and two cast-iron high-torque wheel motors for independent control of each drive wheel
• Hydro Pumps: Two Hydro-Gear PG Series 10cc pumps with dump valves for movement without running engine; one cooling fan
• Drive Wheel Motors: Two Parker TG 14.5 cu. inch cast-iron high torque wheel motors
• Hydro Fluid Cooling Group: 3.0 qt. capacity cooling reservoir; uses SAE 20W50 fluid and 10 micron filter
• Steering/Travel Control: Twin lever steering control with individual control to each wheel
• Dump Valves: Allows for movement without engine running
• Axles: 1.25" heavy-duty, straight motor shafts
• Wire Harness: 14 and 16 gauge wire
• Safety Group: Footplate-actuated operator presence system interlock to engine kill

Product Specification

• Type: Plug-style aeration. Mid/under-belly mount.
• Aerating Width: 30"
• Aerating Depth/Adjustment: 1” to 4” in 1/2” increments. Simple and intuitive depth selection pin with easy-grip rubber knob.
• Tines: 48 self-cleaning, replaceable, steel coring tines
• Tine Activation & Pressure: Hydraulic tine engagement (raise and lower) via a foot-activated switch. Tine activation switch on the instrument panel prevents accidental engagement/disengagement while working or transporting. Adjustable hydraulic down-pressure helps to penetrate even the hardest and driest soils to ensure effective aeration performance in all conditions.

Dimensions

• Length: 68.6"
• Width: 49.8"
• Height: 51.2"

Description:

The Scag® Clam-Shell Grass Catcher (GC-CS) is the perfect answer for operators that do not want to leave the mower’s seat to dump their debris. This simple-to-use catcher system allows you to dump the hopper by pulling a lever.

After the initial installation, the entire catcher assembly can be removed and reinstalled in minutes without any tools! Just pull three quick-pins, release the belt and lift it off. A 12-bushel-capacity hopper collects debris from a blower that pulverizes the debris, reducing particle size and increasing the density inside the hopper. What does this mean to you? Shredding the debris allows you to pack from 50% to over 100% more into the same amount of space when compared to other grass catchers on the market. Simply put, you will be able to collect more debris before you have to stop and empty the hopper. That saves time and greatly increases productivity.

Large Hopper Capacity

The large-capacity hopper (12 bushels, 112 gallons, 14.9 cubic feet) is tapered to allow the debris to dump easily.

All-Steel Blower Assembly

The all-steel blower assembly is driven by the cutter deck via a self-adjusting belt idler system, rather than an auxiliary engine. That means a more compact design, less maintenance, less initial cost, quieter operation and less overall weight. Thick, 1/4" fan-blade material ensures dependability and long life. Improved blower bearing features a stronger cast-iron housing and easier greasing for long, reliable service.

Description:

Making new tracks. Breaking new ground. Making a stand for more diverse profitability. However you say it, the new Scag® Jackal™ stand-on mini skid steer is doing it. Hit the ground running with this bold workhorse, and dig into untapped productivity and profit-making potential.

Specifications:

• Tracking Width: 35.5″
• Engine: Kohler® KSD1403
• Horsepower: 24.7 HP

Description:

Making new tracks. Breaking new ground. Making a stand for more diverse profitability. However you say it, the new Scag® Jackal™ stand-on mini skid steer is doing it. Hit the ground running with this bold workhorse, and dig into untapped productivity and profit-making potential.

Specifications:

• Model: SJ1125-W-40-25KBD
• Blade Width: 40″
• Engine Brand: Kubota®
• Engine Model: D1305-E4B
• Engine Output: 24.8 HP

Description:

Making new tracks. Breaking new ground. Making a stand for more diverse profitability. However you say it, the new Scag® Jackal™ stand-on mini skid steer is doing it. Hit the ground running with this bold workhorse, and dig into untapped productivity and profit-making potential.

Specifications:

Tag Size: 40″

Engine: Yanmar® 3TNV80FT-ZMYA

Horsepower: 24.7 hp

Dimensions

• Length (w/o front attachment): 86″
• Length (w/ front attachment): 112″
• Width (w/o front attachment): 35.5″
• Width (w/ front attachment): 36″
• Height: 56.5″
• Weight (no fuel, no attachment): 2,952 lb
• Weight (no fuel, with 34″ bucket): 3,127 lb

Chassis & Drive

• Fuel Tank: Dual 6-gallon tanks (12 gal total)
• Ground Clearance: 7.5″
• Track: 7″-wide reinforced tracks (optional 9″)
• Drive System: Hydro drive with dual 18cc pumps & Parker Torqmotor TGK 360cc LSHT motors
• Ground Pressure: 5.5 psi
• Travel Speed: 0–4.0 mph
• Parking Brake: Mechanical sprocket lock

Hydraulics

• Auxiliary Flow: 15 GPM @ 3,000 psi
• Reservoir Capacity: 12 gallons (MV68 fluid)
• Control: Joystick-based pilot servo
• Hydraulic Lift Arms: Radial lift, universal mount

Lift & Loader Specs

• Lift Capacity: 1,125 lb
• Tip Capacity: 3,142 lb
• Bucket Width: 34″ (inside), 36″ (cutting width)
• Hinge Pin Height: 83″
• Max Rollback Angle: 25°
• Dump Angle: 40°

Description:

Features:

• 4-BLADE IMPELLER - FABRICATED AND BALANCED, 20-INCH, 4-BLADE IMPELLER: Within the unit’s 7.5″-wide housing is a welded-steel impeller with 3/8″-thick steel blades. Dynamically balanced for reduced vibration, longer life and less stress on the engine, these loaders boast an effective, high-output (up to 4,680 CFM), debris-reducing design.
• SMART CONSTRUCTION AND CONVENIENT SERVICEABILITY - EASY ACCESS FOR WEAR PLATE AND IMPELLER SERVICE: 1/4″-thick, bolt-in, replaceable wear liner extends service life. Removable rear-housing cover allows easy access to impeller and wear plates.
• LOCKING BOOM ARM AND INTAKE NOZZLE - SAFE AND CONVENIENT TRANSPORT: Transport lock safely secures the boom arm and hose when not in use; nylon bearing delivers smooth movement. A transport pin locks the nozzle to the loader to help protect the hose during transportation.

Specification:

• Manufacturer: SCAG Power Equipment
• Model: Tow-Behind (TL20W-26CH-EFI)
• Model Code: TL20W-26CH-EFI
• Color: Orange

BODY

• Frame: Construction - All-steel, welded
• Blower Construction: Removable back panel for easy impeller and wear plate access
• Blower Wear Plates: Standard 1/4 in. steel, replaceable

DIMENSIONS

• Length:
• Intake Hose: 120 in.
• Discharge Tube: 60 in.
• Height: 110 in.
• Width:
• Trailer: 53.5 in.
• Impeller: 6.5 in.
• Housing: 7.5 in.
• Diameter:
• Impeller: 20 in.
• Discharge Tube: 8 in.
• Weight: 990 lb.

ENGINE

• Engine: Kohler® Command PRO® EFI, V-Twin
• Horsepower: 26.5 hp
• Starter: Electric
• Fuel Tank Capacity: 5.5 gal. plastic tank with built-in fuel gauge

OPERATIONAL

• Blades Output: 4,680 cfm
• Discharge Tube: Clear thermoplastic
• Tires: 205 / 75 R15 highway tires with steel wheels

Description:

With a steel beveled intake nozzle that makes debris pickup easy and ambidextrous handle for enhanced maneuverability, it’s time to stand your ground with the Skid-Mount. Its welded-steel impeller with 3/8″-thick steel blades are balanced for reduced vibration and put less stress on the engine—delivering performance for years to come.

Specifications:

• Product Specification: Skid-Mount
• Fuel Capacity / Tank: 1.75 gallons – engine-mounted metal tank
• CFM Output: 3,075
• Frame Construction: All-steel, welded
• Impeller Construction: 4-blade, 3/8"-thick blades, all-steel, welded
• Impeller Mounting: Tapered locking hub
• Impeller Diameter / Width: 20" / 5.25"
• Blower Housing Construction: Removable back panel for easy impeller and wear plate access
• Blower Housing Width: 6"
• Blower Housing Wear Plates: Standard: 1/4"-steel, replaceable
• Hose Specifications: 120" length, 10"-diameter intake hose, 0.045 black thermoplastic rubber, wire helix with wearstrip
• Unit Mounting: 4" steel skid risers
• Discharge Tube: Clear thermoplastic, 7" diameter
• Throttle Control: Commercial-grade, all-steel mechanicals, plastic debris cover
• Highway Ready: n/a
• Axle: n/a
• Tires: n/a
• Trailer Width: n/a
• Height: 74.25" (without skid or hitch mount attached)
• Weight: 437 lb
• Warranty: 2-Year Commercial; 2-Year Non-Commercial; 90-Day Rental

Description:

THE REAL DEAL FOR SERIOUS CHEMICAL APPLICATIONS

Looking to expand your lawn care offers? The Turf Storm XL and Turf Storm are ready to help you handle any job. With a 220-lb spreader capacity, 60-gallon sprayer capacity and an 8-ft spray boom, the Turf Storm XL can handle even the largest jobs. Conversely, the Turf Storm, with its 120-lb spreader capacity and 30-gallon sprayer capacity, is ideal for working on smaller residential properties. And, its 35.5-inch width (65-inch boom folded in) lets it fit through any standard gate. A 75-foot hose reel (Turf Storm XL) or 15-foot hose reel (Turf Storm) allows you to reach tough spaces.

Features

Dual Liquid Tanks

• Large Liquid Capacity:
• Turf Storm XL: 60-gallon total capacity
• Turf Storm: 30-gallon total capacity
• Translucent Tanks: Raised measurement indicators for accurate fill levels.
• Spray Booms:
• Turf Storm XL: 8-foot-wide with five nozzles, spraying widths of 2, 6, 8, or 10 feet.
• Turf Storm: 65-inch wide, spraying widths of 2, 6, or 8 feet.
• Hose Reel:
• Turf Storm XL: 75-foot hose reel
• Turf Storm: 15-foot flex hose for reaching tough spaces.

Large Hopper Capacity

• Hopper Sizes:
• Turf Storm XL: 220-pound dry/granular capacity
• Turf Storm: 120-pound capacity
• Spread Width: Up to 25 feet with a high-torque electric spreader motor.

Maneuverability and Stability

• Wide Stance: Ensures optimum maneuverability.
• Dynamically Balanced: Eliminates the need for locking front casters (Turf Storm XL only).

Ease of Use and Maintenance

• Quick Drain Plug: Conveniently located at the lowest part of the tanks for quick draining and cleaning.
• Accurate Application Pattern: High torque electric spreader motor for better control and reduced system heat.

Operator Comfort and Control

• Ergonomic Controls: Finger tip controls for easy operation, with all controls within reach.
• Spacious Operator Platform: Extra-large comfort cushion with coil-spring suspension for a smooth ride.

Powerful Engine

• 23hp Vanguard Engine: Briggs Vanguard® engine offers ample power and efficiency.
• Dependable Charging System: 50-amp charging system supports reliable spreader operation and powers accessories (e.g., 7 gpm pump, lights, foam marker).

Maintenance Accessibility

• Easy Access Design: Removable cushion and open lower area for quick access to hydro drive pumps, reservoir, and other mechanical components.

Specifications:

• Hopper Capacity: 220 lb
• Spreader Motor: High-Torque Electric
• Spread Width: Up to 25 ft.
• Deflector: Mechanical lever activation of stainless steel door
• Hopper Cover: Included

Spray System

• Spray Capacity: 60-gallon dual tanks (30-gallon each); high visibility tanks
• Hinged Boom Arms: 8-foot wide, 5 nozzles
• Spray Width: 2, 6, 8, or 10 ft
• Breakaway Booms: Standard
• Coil Hose: Heavy-duty, 75-foot high-pressure hose
• Pump Capacity: 5 gpm (7 gpm optional accessory)

General

• Model: STS60-23BV
• Total Fuel Capacity: 5 gallons
• Front Wheel(s): 16″ x 6.5″-8″, pneumatic
• Rear Wheels: 20″ x 12″-10″, 4-ply
• Currently Available Accessories: Foamer Kit, LED Light Kit, and 7 GPM pump

Engine

• Engine: Briggs Vanguard™
• Horsepower: 23 hp
• Charging System: 12 Volt, 50 Amp

Drive System

• Drive System: Dual pump and motor
• Pumps: Hydro-Gear: PG Series 10 cc
• Motors: Parker TG Series: 14.5ci
• Ground Speed: Up to 8.5 MPH forward, up to 5 MPH reverse
• Parking Brake: Hand lever

Dimensions

• Length: 67″
• Width (spray booms in): 54″
• Width (spray booms out): 82″
• Height: 50″
• Weight (dry): 965 lb

Warranty

• Warranty: 2-Year Commercial & Non-Commercial Warranty; 90-day Rental

Description:

It’s time for you to rise to the top of the food chain and tame turf with the Turf Tiger II™, a machine that’s tougher than any job you can throw at it. Engineered for superior durability, productivity and comfort, the Turf Tiger II gives you the edge over whatever nature throws at you while leaving you ready to take on the next challenge.

Specifications:

• Engine Model: Briggs Vanguard™ BIG BLOCK™ EFI (Electronic Fuel Injection)
• Horsepower: 40 HP
• Cooling System: Air-cooled
• Fuel System: Electronic Fuel Injection (EFI)

Deck:

• Deck Type: Velocity Plus™ Cutter Deck
• Deck Size: 72 in (182.9 cm)
• Deck Construction: Fabricated
• Deck Material: Heavy-duty steel (likely 7 gauge, common for commercial mowers)
• Cutting Width: 72 in (182.9 cm)
• Discharge Configuration: Side discharge
• Cutting Height Range: Typically adjustable from 1.5 in to 5 in (3.8 cm to 12.7 cm), but specific settings may vary
• Deck Drive: Belt-driven spindles, common in heavy-duty mowers

Description:

The power of a tiger with the swiftness of a cat, the nimble Tiger Cat® II combines the best of both worlds. Making full use of its compact footprint and robust engine, this easily adjustable and extremely durable machine gets into, around and out of tight spaces quickly—putting you on the path toward increased profitability.

Features:

TRI-PLATE DECK TOPS:

Super-rigid Tri-Plate deck construction results in a nearly 1/2" thick (0.485") steel cutter deck top (most zero-turn rider models).

FRONT BAFFLE CHAMBER:

Special front baffle chamber allows the grass to be lifted up before the blade cuts it. No stragglers.

WEAR PAD:

Replaceable trim-side wear pad protects the deck and landscaping from scraping and impact damage.

Specifications:

Fuel Capacity

• Total Fuel Capacity: 9.5 gallons

Tires

• Drive Tires:
• 24" x 9.5"-12" (for 48" and 52" cutting widths)
• 24" x 12"-12" (for 61" cutting width)
• Caster Tires: 13" x 6.5"-6", flat-free

Seat

• Type: 4-point iso-mounted mid-back
• Mounting: Mounted on operator-suspension platform

Drive System

• Drive System Type: Dual Pump and Motor
• Pumps: Hydro-Gear 12 cc
• Motors: Parker 14.5 ci
• Forward Ground Speed: 12 mph
• Reverse Ground Speed: 5 mph
• Parking Brake: Foot-operated pedal

Deck

• Cutting Widths: 48", 52", and 61"
• Type: Velocity Plus™
• Cutting Height: 1" to 5" in 0.25" increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel, with reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings
• Blade Engagement: Ogura GT3.5 (250 ft lb), adjustable air-gap for extended life