Description:

Whether you are precisely trimming ornamental plants or pruning and cutting small shrubs and grasses, the HSA 26 battery-powered garden shears deliver unparalleled precision and power for the discerning gardener. Ideal for urban or suburban homeowners living in noise-sensitive areas, the HSA 26 provides more precise and cleaner cuts than the previous model with proven blade geometry that improves plant appearance. With its lightweight construction, ergonomic design, rubberized grips, and two easily interchangeable blades, you get all the comfort, control, and flexibility you need. Part of the innovative STIHL AS System of battery-powered tools, the HSA 26 puts a new level of power and performance in the palm of your hand.

Features:

• Rubber Grips - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Double-Sided Cutting Blades - STIHL hedge trimmers with double-sided cutting blades cut both directions.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Incredible Speed - his product delivers optimal cutting by operating at a high rate of speed.
• Proven STIHL Blade Geometry - Proven blade geometry from STIHL allows for a more precise cut.
• Onboard LED Indicator - Users know how much battery life they have thanks to an LED indicator.
• Compact, Ergonomic Design - The compact, ergonomic design provides more comfortable use.
• Long Run Times - Get more done On A Single Charge™. *Run time per charge may vary depending on usage and application.
• Simple Operation - Its ease of use and simple design make this ideal tool for all users.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Battery
• Weight: 1.5 lbs.
• Strokes Per Minute: 2,200
• Grass Shear Cutting Attachment Width: 4.7 in.
• Hedge Shear Cutting Attachment Length: 7.9 in.
• Grass Shear Run Time: 120 min.
• Hedge Shear Run Time: 110 min.
• Voltage: 10.8 volt
• Battery System: AS System

Description:

The HSA 30 is an easy to use hedge trimmer that gives you the high-quality performance you need to get the job done. With an onboard LED indicator, the user can quickly see the battery level. Equipped with double-sided, laser-cut, diamond-ground blades, the HSA 30 is designed to help you achieve a more precise cut with less effort as you take on small hedges and shrubs. The HSA 30 can run for up to 30 minutes making it ideal for homeowners with small yards looking for a dependable tool. Depicts total run time with one AS 2 battery included in set.

STIHL hedge trimmers with double-sided cutting blades cut both directions.

The engine housing has smooth surfaces and round contours that help to keep it from getting caught on branches during use. The design also makes cleaning easy.

Each blade is laser cut and ground using diamond discs. The hardened cutting edges are highly resilient and remain sharp for a longer period of time.

Features:

• 18-inch (45 cm) double-sided, laser-cut, diamond-ground blade for clean, efficient cuts.
• Powerful and quiet electric motor for effortless trimming.
• Up to 50 minutes of runtime on a single charge (battery and charger included).
• Two-handed safety control for secure and comfortable operation.
• Integrated LED charge level indicator for convenient monitoring.
• Screw-on tip protector safeguards the blade and surrounding objects.

Specifications

• Brand Name:STIHL
• Product Type: Hedge Trimmer
• Antivibration: Yes
• Blade Length: 18 inch
• Brand Name: STIHL
• CARB Compliant: Yes
• Cut Strokes per Minute: 2800 Strokes per Minute
• Model Number: HSA 30
• Volts: 10.8 volt
• Warranty: 1 Year
• Powered By: Battery
• Kit or Tool Only: Kit (Battery & Charger)
• What's Included:AL 1 Battery Charger, AS 2 Battery

Description:

The HSA 50 battery hedge trimmer features double-sided blades that cut both directions with droplet-shaped cutters that help secure materials in place while cutting. Combined with diamond-ground blades, this high-speed trimmer operates at 2,800 strokes per minute with minimal vibration and can cut up to 1,000 feet per charge.* The HSA 50 hedge trimmer is compatible with the AK Battery System for homeowners and packs a powerful punch at an affordable price.

*Run time per charge may vary depending on usage and application.

Features:

• Laser-Cut Diamond-Ground Blades - Each blade is laser cut and ground using diamond discs. The hardened cutting edges are highly resilient and remain sharp for a longer period of time.
• Droplet-Shaped Cutters - Droplet-shaped cutters help secure materials in place during cutting, increasing grip and allowing for more efficient cutting, better performance, and higher work progress than the previous model.
• Battery Indicator Lights - This product is equipped with built-in indicator lights, showing the battery status and remaining level of charge.
• High Cutting Speed - High cutting speed of 2,800 strokes per minute and minimal vibration cuts more material per charge.
• Long Run Time with AK 10 - This hedge trimmer features long run times, an incredible power-to-weight ratio, and an affordable price when paired with the AK 10 battery.
• Two-Handed Design - Equipment with this feature is easily started. The cutting speed can be adjusted using the rear trigger control, allowing for a fine and precise cut. The two-handed design is suitable for both left and right-handed users.
• Double-Sided Cutting Blades - STIHL hedge trimmers with double-sided cutting blades cut both directions.
• Vertical Hanging Slot - The built-in hanging slot allows for easy storage when not in use.
• Ease of Operation - Easy to operate, this lightweight, compact hedge trimmer helps you cover more distance with less fatigue, so you can finish the job.
• Compact, Ergonomic Design - The compact, ergonomic design provides more comfortable use.
• Blade Scabbard - The blade cover helps protect the cutting blade during storage and transport.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Functional Design - The housing has smooth surfaces and round contours that help to keep it from getting caught on branches during use. The design also makes cleaning easy.
• Rubberized Soft-Touch Handle - Soft rubber texture is both easy to grip and makes the product comfortable to hold for extended periods. 
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Battery

• Weight: 6.4 lbs.

• Weight (with AK 10): 8.2 lbs.

• Blade Length: 20 in.

• Strokes per Minute: 2,800

• Tooth Spacing: 1.8 in.

• Battery System: AK System

• Run Time (with AK 10): Up to 50 min.

• Voltage: 36 volt

Description:

The Made in Americaº HT 105 pole pruner is a professional-grade tool designed to simplify the task of pruning high and low-hanging branches with precision and efficiency. Its innovative square telescoping shaft enhances rigidity while extending to various heights, allowing professionals to tackle pruning tasks up to 16 feet above the ground effortlessly. Equipped with a lightweight design, the HT 105 minimizes operator fatigue, making it ideal for prolonged use during landscaping and tree maintenance projects. Featuring a semi-automatic choke lever, one-touch stop button, and a no-slip grip design, this pole pruner ensures ease of operation and enhanced user comfort. The HT 105 is powered by a robust 1.4 bhp engine and features a 12-inch OILOMATIC® chain with 1/4" STIHL PICCO™ 71 PM3 saw chain for fast, clean cuts.

Features:

• Telescoping Pole: Adjustable shaft extends to heights of up to 16 feet for reaching high branches.
• Purge Pump Primer: Delivers fuel to the carburetor with the press of a button, reducing starting pulls after extended breaks between uses.
• Multi-Function Control Handle: Convenient handle design provides easy access to all controls for improved task efficiency.
• Anti-Vibration System: Minimizes vibration levels for reduced operator fatigue during prolonged use.
• Made in America: Majority of STIHL products sold in America are made with U.S. and global materials.
• Balanced Design: Ensures comfortable and stable handling.
• IntelliCarb™ Compensating Carburetor: Automatically adjusts air/fuel ratio to maintain correct engine RPM even with restricted air filters.
• Tough Metal Gearbox with Durable Metal Branch Hook: Lightweight design provides high-speed precision while pruning.
• Vertical Pleated Paper Air Filter: Enhances air filtration efficiency, extending time between servicing.
• Semi-Automatic Choke Lever: Simplifies start procedure with a three-step start process.
• One-Touch Stop Button: Enables quick engine shutdown with the press of a button, saving time and preventing flooding.
• New Quick-Adjustment Clamp Nut with No-Slip Grip Design: Enhances user comfort and allows easy shaft adjustment.
• 1/4" STIHL PICCO™ Saw Chain: Narrow design requires less pressure for fast, clean cutting results.

Specifications:

• Power Source: Gas
• Weight: 17.4 lbs.
• Guide Bar Length (Recommended): 12 in.
• OILOMATIC® Chain: 1/4" STIHL PICCO™ 71 PM3
• Chain Oil Capacity: 7.4 oz.
• Overall Length: 139.2 in.
• Engine Power: 1.4 bhp
• Ful Capacity: 17.9 oz.
• Displacement: 31.4 cc

Description:

Ambitious homeowners and tree care professionals now have another quiet, zero exhaust emission, low vibration option for trimming out-of-reach branches. The HTA 86 lithium-ion battery pole pruner offers lightweight, balanced cutting thanks to its brushless, commercial-grade, high-torque electric motor. Part of the STIHL® AP System, the HTA 86 offers long run times—up to 42 minutes with the AP 200 battery—without gradual drop in performance. The HTA 86 features the same lightweight toolless telescoping shaft found on its gas-powered counterpart and extends to 12.8 feet for those tall tree-trimming tasks, giving you the ability to reach up to 16 feet high. Best of all, there’s no gasoline costs, no restrictive power cords, and it’s virtually maintenance-free.

Run time may vary based on battery type, charge level and capacity, model, operating style, and conditions. Batteries and chargers can be purchased separately or as a combined set with the tool.

This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.

Features:

• IPX4 Rating - This tool is IPX4-rated for weather-resistant construction and has been designed and tested for splash-water protection.
• Toolless and Semi-Transparent Bar and Chain Oil Tank - The semi-transparent bar and chain oil tank makes it easy to check oil levels.
• Robust Branch Hook - The robust branch hook helps users remove loose clippings from trees.
• Quick and Easy Length Adjustment—No Tools Required - Users can easily adjust the shaft length without the need for tools.
• Telescoping Pole - With an adjustable shaft, telescoping pole pruners can cut branches up to 16 feet above ground.
• Efficient and Virtually Maintenance-Free Motor - The brushless motor is ideal for noise-sensitive environments with virtually zero maintenance required.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Retaining Latch - All STIHL® Battery powered products feature a retaining latch designed to prevent the unit from unintentional starts when the battery is inserted.
• Variable-Speed Trigger - The variable-speed trigger allows precise control for each task.
• Multi-Function Control Handle™ - Having easy access to all controls on one comfortable handle helps make tasks easier so the operator’s hand never has to leave the handle.
• High-Tech Polymer Housings - Lightweight housings that withstand greater impact and are corrosion-resistant.
• Reduced-Emission Engine Technology—Caring for Nature™ - The STIHL® “Caring for Nature” seal identifies powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL® defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications

• Power Source: Battery
• Powerhead Weight: 11 lbs
• Weight (with AP 200 Battery): 13.8 lbs
• Guide Bar Length (Recommended): 10 inches
• OILOMATIC® Chain: 1/4" STIHL PICCO™
• Overall Length: 126 inches
• Battery System: AP System
• Run Time (with AP 200 Battery): Up to 46 minutes
• Voltage: 36 volts

Description:

Tackle yard projects with ease with the KM 111 R KombiMotor. Part of the STIHL KombiSystem of multi-tasking tools, this model features a powerful, low exhaust emission engine with a large fuel tank that provides 30% longer run times than the previous model. Professional landscapers looking for power and versatility will like the KM 111 R and its semi-automatic choke lever, one-touch stop, and improved air filter extending service life and replacement intervals. Plus, the KM 111 R is compatible with up to 14 interchangeable attachments, allowing you to operate and power up multiple tools with one KombiMotor while saving on fuel and maintenance.

The STIHL KombiSystem is a versatile landscaping system that includes a powerful STIHL KombiMotor and a full line of attachments. Together, they give landscaping professionals the ability to tackle a tremendous range of outdoor tasks without loading the trailer with a pile of tools. Attachments include trimmers, blowers, hedge trimmers, edgers, pruners, cultivators, and more. Each attachment slides into the KombiMotor effortlessly and is secured via a quick-release coupling system, saving you time as well as trailer space.

Features:

• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.
• Multi-Function Control Handle - Having easy access to all of the controls on one comfortable handle help makes it easier to complete tasks so the operator’s hand never has to leave the handle.
• Anti-Vibration System - STIHL has a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Loop Handle - The loop handle (R) is an adjustable rounded handle mounted on the shaft for support and control. The handle is designed to help control the machine in different positions, ideal for reaching tough spots. The handle is large enough to accommodate a gloved hand comfortably.
• Quick-Release Coupling - The quick-release coupling system makes it easy to switch between Kombi attachments. In addition, this feature allows KombiSystem equipment to be dismantled into two parts for easy transport and storage and then re-assembled quickly without tools.
• Split Shaft - A split shaft and special toolless quick-release coupling lets you easily switch between attachments, making the KombiSystem highly versatile as well as easy to transport and store.
• Electronic Ignition Module - The electronic ignition provides reliable starting and because it is fully enclosed, it is protected from moisture and debris for longer service life.
• Purge Pump Primer - A small fuel pump delivers fuel to the carburetor when pushed, reducing the number of starting strokes required following extended breaks in operation.

Specifications:

• Power Source: Gas
• Engine Power: 1.4 bhp
• Fuel Capacity: 24.0 oz.
• Displacement: 31.4 cc

Description:

The FSA 60 R gives users exceptional performance in a lightweight design. Its brushless motor virtually eliminates the need for maintenance, so you can relax and enjoy the clean and quiet benefits of battery power. Optimally paired with the AK 20 battery, the FSA 60 R has a run time of up to 25 minutes* On A Single Charge™. The trimmer comes standard with the AutoCut® C 6-2 featuring EasySpool™ which allows the mowing head to be respooled without disassembling the mowing head. Alternatively, the trimmer may be equipped with optional STIHL PolyCut™ 6-2 or DuroCut 5-2 mowing heads. With a variable speed, this trimmer delivers an optimized performance and run time. The 13.8-inch cutting width clears a wide area in a single pass and the bump guard allows for careful trimming around obstacles like trees and shrubs. The FSA 60 R is available as a standalone unit or as part of a value-priced set with the recommended AK 20 battery and the AL 101 charger.

*Run time per charge may vary depending on usage and application.

Features:

• EasySpool™ Head - With the AutoCut® C EasySpool™, users can reload the line by simply inserting the line into the eyelets and twisting the bump knob.
• Loop Handle - A thumb screw allows the ergonomic loop handle to be easily adjusted to the desired position without tools.
• Adjustable Front Handle - The front handle is easily adjustable (360-degree rotation) for comfort.
• Start/Run/Stop Controls on Handle - Convenient start/run/stop controls are built into the handle for easy operation.
• Variable-Speed Trigger - The variable-speed trigger allows precise control for each task.
• Bump Guard - The bump guard, which is standard equipment, helps when trimming around trees, shrubs and other obstacles by creating space between objects and trimmer head.
• Hanging Loop - Hang your cordless trimmer securely on a wall to save space using the loop in the handle housing.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Retaining Latch - All STIHL battery-powered products feature a retaining latch that is designed to prevent the unit from unintentional starts when the battery is inserted.
• High-Tech Polymer Housing - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Throttle Trigger Interlock - This safety feature must be depressed before the trigger can be activated.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specification:

• Power Source: Battery
• Weight:
• Without battery: 7.1 lbs.
• With AK 20 battery: 9.8 lbs.
• Battery System: AK System
• Run Time (with AK 20 battery): Up to 25 minutes
• Voltage: 36 volt
• Cutting Width: 13.8 in.

Description:

The MM 56 C-E YARD BOSS® is a versatile multi-tasking tool designed to tackle various landscaping tasks efficiently and effortlessly. With enhanced power and fuel capacity compared to its predecessor, this tool is equipped to handle a range of applications with ease. Standard as a cultivator, it excels at breaking up weeds and compacted soil in gardens and flower beds. Transitioning to any of its eight optional attachments, such as trimmers, edgers, dethatchers, and lawn aerators, is seamless, ensuring the right tool for every task. The STIHL Easy2Start™ system ensures quick and effortless starts, while the compact design facilitates easy storage and transport after use.

Features:

• Reduced-Emission Engine Technology: Environmentally conscious design with low exhaust emissions.
• Compact Design: Folding handles and front hand grip enable easy storage and transport.
• Purge Pump Primer: Facilitates easy starting after extended breaks in operation by delivering fuel to the carburetor.
• Protected Spark Plug: Ensures spark plug terminal protection while being easy to change.
• Made in America: Majority of STIHL products sold in America are made with U.S. and global materials.
• Multi-Function Control Handle: Convenient access to all controls on one handle for seamless task completion.
• Multi-Tasking Tool: Quickly switch between eight optional attachments for versatility.
• STIHL Easy2Start™: Effortless starting system for quick and easy tool activation.

Specifications:

• Power Source: Gas
• Powerhead Weight: 21.8 lbs.
• Tine Speed: 200 rpm
• Cultivating Width: 8.5 in.
• Pick Tine Diameter: 9.1 in.
• Engine Power: 1.14 bhp (brake horsepower)
• Fuel Capacity: 11.5 oz.
• Displacement: 27.2 cc

The MM 56 C-E YARD BOSS® is your go-to solution for efficient and versatile landscaping tasks, offering power, convenience, and reliability in one compact package.

Description:

The MS 180 C-BE is where handy meets high tech. This lightweight, easy-to-maneuver chainsaw’s first order of business is fast, easy starting with the STIHL Easy2Start™ system. Just a light pull on the cord does it. Just as easy is the STIHL Quick Chain Adjuster, which makes it possible to adjust the saw chain without tools. Unbelievably easy to use, the MS 180 C-BE is a big help with your list of woodcutting chores around the home.

Features:

• STIHL Easy2Start™ (E) - The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gasoline (Gas)
• Powerhead Weight: 9.3 lbs.
• Guide Bar Length (Recommended): 16 inches
• Chain Type: OILOMATIC® 3/8" PMM3
• Chain Oil Capacity: 4.9 oz.
• Engine Power: 2.0 brake horsepower (bhp)
• Fuel Capacity: 8.5 oz.
• Displacement: 31.8 cc

Description:

The MS 211 uses advanced technology in the form of a powerful, fuel-efficient, low exhaust emission engine, but it doesn’t stop there. It also reduces your maintenance with a professionally inspired pre-separation air filtration system (extending air filter life up to five times longer).

Features:

• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specification:

• Power Source: Gas
• Powerhead Weight: 9.5 lbs.
• Guide Bar Length (Recommended): 18 in.
• Chain Type: OILOMATIC® 3/8" PM3
• Chain Oil Capacity: 9.0 oz.
• Engine Power: 2.3 bhp
• Fuel Capacity: 9.1 oz.
• Displacement: 35.2 cc

Description:

When it comes to building a reliable woodpile for keeping your home warm and cozy, the STIHL MS 250 chainsaw is the tool you need. With an exceptional power-to-weight ratio, this chainsaw is up to the task of handling clearing or cleanup tasks, as well as cutting through small limbs and trees. Easy to use and packed with great features, the MS 250 has been a customer favorite for many years, setting the standard for efficiency and reliability in every performance.

Features:

• Easy-Access Air Filter Cover: Provides effortless removal of the cover for fast filter cleaning or replacement.
• Winter/Summer Shutter: Allows the carburetor to operate at optimum temperature year-round and helps prevent carburetor icing when working below 50°F (10°C).
• Anti-Vibration System: Minimizes vibration levels, reducing operator fatigue and providing a more comfortable working experience.
• Master Control Lever™: An easy-to-use single lever that operates the choke, starting throttle lock, and on-off switch. The throttle trigger must be pulled before moving the Master Control Lever™ to the choke position.
• Side-Access Chain Tensioner: Makes it more convenient for the user to adjust the saw chain with a bar wrench compared to the typical location of the guide bar adjustment screw.
• Throttle Trigger Lockout: Ensures safety by requiring depression before the trigger can be activated.
• High-Tech Polymer Housings: Lightweight, impact-resistant, and corrosion-resistant.
• Made in America: The majority of STIHL products sold in America are manufactured in America using U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.1 lbs.
• Guide Bar Length (Recommended): 18 inches
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 6.8 oz.
• Engine Power: 3.0 bhp
• Fuel Capacity: 15.9 oz.
• Displacement: 45.4 cc

Description:

The STIHL MS 251 C-BE offers all of the comfort and ease of the MS 251 WOOD BOSS®, but this chainsaw is also easy to start and adjust on the fly. The MS 251 C-BE is perfect for felling small trees, pruning and thinning, and cutting firewood simply and efficiently. It even boasts up to a 20 percent fuel savings and a 50 percent reduction in exhaust emissions when compared to previous models—allowing you to enjoy longer run times while feeling good about your impact on the environment. A Quick Chain Adjuster also makes it simple to put the correct tension on the saw chain without tools. Plus, features like Easy2Start™ technology, a Master Control Lever™, and reduced vibration make the STIHL MS 251 C-BE a great choice for ambitious homeowners who need a chainsaw that is easy to use while still packing plenty of power.

Features:

• STIHL Easy2Start™ (E) - The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.
• Quick Chain Adjuster (QCA) (B) - The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 11.5 lbs.
• Guide Bar Length (Recommended): 18 in.
• OILOMATIC® Chain: .325" RM3
• Chain Oil Capacity: 6.7 oz.
• Engine Power: 3.0 bhp
• Fuel Capacity: 13.2 oz.
• Displacement: 45.6 cc

Description:

The STIHL MS 251 WOOD BOSS® chainsaw is designed to deliver all the power you’d expect from STIHL equipment with a comfortable and ergonomic design. The MS 251 WOOD BOSS® is perfect for felling small trees, pruning and thinning, and cutting firewood simply and efficiently. With up to a 20 percent increase in fuel savings and a 50 percent reduction in exhaust emissions—when compared to previous models—you can enjoy a longer run time while feeling good about your impact on the environment. Features like a Master Control Lever™ and reduced vibration make the STIHL MS 251 WOOD BOSS® a lean, easy-to-use machine that still packs plenty of power.

Features:

• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Toolless Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Throttle Trigger Lockout - This safety feature must be depressed before the trigger can be activated.
• High-Tech Polymer Housings - Housings are lightweight, withstand greater impact, and are corrosion-resistant.
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• Made in America - A majority of STIHL products sold in America are made in America of U.S. and global materials.

Specifications:

• Power Source: Gas
• Powerhead Weight: 11.0 lbs.
• Guide Bar Length (Recommended): 18 in.
• Oilomatic® Chain: .325" RM3
• Chain Oil Capacity: 6.7 oz.
• Engine Power: 3.0 bhp
• Fuel Capacity: 13.2 oz.
• Displacement: 45.6 cc

Description:

The MS 261 C-M has all the same great features as the MS 261—low exhaust emissions, high fuel efficiency and robust performance—but also features the advanced STIHL M-Tronic™ engine management system. The STIHL M-Tronic™ onboard microprocessor digitally monitors and automatically compensates for changes in your work conditions, including elevation, temperature, fuel quality, varying octane levels, and dirty filters. The end result is maximum performance across a wide range of cutting conditions without making any manual adjustments. The MS 261 C-M also features redesigned cylinders and a slimmer, ergonomic housing for an impressive power-to-weight ratio.

Features:

• STIHL M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 10.8 lbs.
• Guide Bar Length (Recommended): 16 in.
• Chain: OILOMATIC® .325" RM3
• Chain Oil Capacity: 9.13 oz.
• Engine Power: 4.0 bhp (brake horsepower)
• Fuel Capacity: 16.9 oz.
• Displacement: 50.2 cc

Description:

Brains and brawn come together in this well-rounded professional chainsaw. The MS 362 C-M features the same great power, weight, and fuel efficiency as the MS 362, but it also features exclusive STIHL M-Tronic™ engine management technology. This innovative microprocessor-controlled engine management system optimizes engine performance and compensates for changes in operating conditions, such as temperature, elevation, fuel quality, and dirty air filters. It makes sure you’re working with optimal cutting power in any cutting condition.

Features:

• STIHL M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 12.35 lbs
• Guide Bar Length (Recommended): 20 in
• OILOMATIC® Chain: 3/8" RS3
• Chain Oil Capacity: 11 oz
• Engine Power: 4.69 bhp (brake horsepower)
• Fuel Capacity: 20.3 oz
• Displacement: 59.0 cc

Description:

Meet your ideal business partner—the STIHL MS 462 C-M chainsaw—specially engineered for the professional who desires more power with less weight. At just over 13 pounds, the MS 462 C-M is the lightest-ever STIHL chainsaw produced in its fuel-powered class and thus reduces the fatigue you experience in daily forestry work. It features an excellent power-to-weight ratio for added maneuverability tested by professionals in the field. The next generation STIHL M-Tronic™ engine management system electronically controls ignition timing and fuel metering. Conveniently, the saw auto-adjusts for changes in its operating environment, such as changes in altitude and fuel quality, for optimal performance. As an added measure to reduce vibration and user fatigue, the anti-vibration system is designed for good handling when the MS 462 C-M is equipped with longer guide bars.

Features:

• STIHL M-Tronic™ - This product features M-Tronic™ (M) - a new generation of Intelligent Engine Management that eliminates the low and high speed carburetor adjustment screws, compensates for dirty air filter and changes in elevation and fuel quality for optimum engine power at all times.
• STIHL ElastoStart™ - The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ematic™ Lubrication System - The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.
• STIHL Quickstop® - STIHL chainsaws are equipped with a chain stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.
• Lightweight Portability - This product is lightweight for easy portability, great maneuverability, and extended use.
• Adjustable Automatic Oiler - The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.
• Winter/Summer Shutter - The Winter/Summer Shutter allows the carburetor to operate at optimum temperature year-round and helps to prevent carburetor icing when working below 50°F (10°C).
• Bumper Spikes - These spikes prevent pull-in and provide better control, making cutting easier.
• Decompression Valve - The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
• Pre-Separation Air Filtration System - This time-saving technology boosts the efficiency of the engine’s filter system, doubling the time between air filter cleanings. Air drawn into the engine is first separated via centrifugal force, ejecting the heavier dirt particles before being routed to the air filter. This pre-separation means less dirt to be captured by the air filter, resulting in less frequent cleaning and maintenance.
• Side-Access Chain Tensioner - The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
• Master Control Lever™ - The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.
• Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• Tool less Fuel and Oil Caps with Retainers - Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.
• Throttle Trigger Lock - See it in action!
• Reduced-Emission Engine Technology—Caring for Nature - The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

Specifications:

• Power Source: Gas
• Powerhead Weight: 13.2 lbs.
• Guide Bar Length (Recommended): 25 in.
• Oilomatic® Chain: 3/8" RS3
• Chain Oil Capacity: 11.5 oz.
• Engine Power: 5.9 bhp
• Fuel Capacity: 24.3 oz.
• Displacement: 72.2 cc