Description:

3" general purpose water pump

• General purpose, centrifugal 3" pump
• Easy starting Honda OHV commercial engine
• 290 gal./min. capacity
• Silicon carbide mechanical seal
• Cast iron volute and impeller

Features:

• Easy starting Honda OHV commercial engine, part of the durable Honda GX series
• Durable silicon carbide mechanical seal for extended wear
• 4 vane high efficiency impeller designed by Honda for improved performance
• Cast iron volute for rigid-mount and reduced case wear
• Heavy duty full frame protection with convenient tie-down locations
• Isolation mounted engine and pump to minimize vibration and increase durability
• Protected by Honda Oil Alert® to shut off the engine when low oil is detected
• Large strainer allows up to 8 mm (5/16 in.) solids to pass through, reducing clogging

Specifications:

• Engine: GX160, 163cc displacement, 2.7" x 1.8" bore and stroke, compression ratio 9.0:1
• Oil Alert: Standard
• Pump Type: Centrifugal, Self-priming
• Volute: Rigid Mounted Cast Iron
• Impeller: 4 Vane Cast Iron
• Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
• Priming Time: 150 sec @ 16.4 ft.
• Drive System: Direct
• Discharge Capacity: 290 gal/min
• Suction Port Diameter: 3" NPT
• Discharge Port Diameter: 3" NPT
• Total Head Lift: 85 ft.
• Suction Head Lift: 25 ft.
• Maximum Pressure: 37 psi
• Dimensions (LxWxH): 20.1" x 15.2" x 17.9"
• Dry Weight: 57 lb.
• Fuel Capacity: 0.82 gal
• Run Time @ Max Discharge: 1.9 hr
• Strainer Part #: 78325-YG4-000
• Residential Warranty: 24 months
• Commercial Warranty: 12 months

Description:

3" trash pump

• 317 gal./min capacity
• Solid handling capability up to 1 1/16"
• Cast iron volute and impeller
• Quick clean out port

Features:

Heavy-Duty 3" Construction Trash Pump:

• Specifically designed for job sites and applications requiring high-volume trash water capacity.

Easy Starting Honda OHV Commercial Engine:

• Features the durable Honda GX series commercial-grade engine known for reliable starting and ample power in tough conditions.

317 Gallons per Minute Capacity:

• Capable of moving up to 317 gallons of water per minute, making it suitable for demanding pumping tasks.

Solid Handling Capability up to 1 1/16":

• The specially designed impeller allows solids up to 1 1/16 inches to pass through easily without clogging.

Heavy-Duty Full Frame Protection:

• Provides robust protection for the pump and includes tie-down locations for secure transport.

Easy Quick Clean Out Port:

• Designed for quick and straightforward service with an accessible clean-out port for easy maintenance.

Replaceable Stainless Steel Wear Plate:

• Equipped with a replaceable stainless steel wear plate in the volute, enhancing durability and reducing maintenance costs.

Standard Service Tool:

• Includes a multi-tool for easy pump case removal, priming plug adjustment, drain plug maintenance, and hose coupling adjustments.

Durable Silicon Carbide Mechanical Seal:

• Features abrasion-resistant silicon carbide seals that extend wear life and reliability.

Cast Iron Volute and Impeller:

• Utilizes a rigid-mount cast iron volute and impeller to minimize wear and increase pump longevity.

Isolation Mounted Engine and Pump:

• High-performance mounts reduce vibration, preventing the pump from moving or sinking in soft soil conditions and extending component life.

Unique Conical Shaped Impeller:

• Enhances priming efficiency and increases discharge capacity with wide vanes designed for durability and wear resistance.

Protected by Honda Oil Alert®:

• Includes a feature that automatically shuts off the engine when low oil is detected, safeguarding the pump from damage.

Large Heavy Duty Metal Strainer:

• Allows large volumes of water and solids up to 1 1/16 inches to pass through, reducing the risk of clogging. Made from durable steel for rugged conditions.

Specifications:

• Engine: Honda GX270
• Displacement: 270 cc
• Compression Ratio: 8.5:1
• Oil Alert: Standard
• Pump Type: Trash Centrifugal Self-priming
• Volute: Rigid Mounted Cast Iron with Stainless Wear Plate
• Impeller: Conical Cast Iron
• Mechanical Seal (Pump Case / Impeller): Silicon Carbide / Silicon Carbide
• Priming Time: 90 seconds @ 16.4 feet
• Drive System: Direct
• Discharge Capacity: 317 gallons per minute
• Suction Port Diameter: 3 inches
• Discharge Port Diameter: 3 inches
• Total Head Lift: 82 feet
• Suction Head Lift: 26 feet
• Maximum Pressure: 36 psi
• Solids Handling: 1 1/16 inches
• Dimensions (LxWxH): 26.0" x 19.5" x 20.3"
• Dry Weight: 134 lb
• Fuel Capacity: 1.4 gallons
• Run Time @ Max Discharge: 1.5 hours
• Strainer Part #: 78325-YG1-003
• Residential Warranty: 24 months
• Commercial Warranty: 12 months

Description:

2" general purpose water pump

• 164 gal./min. capacity
• Durable silicon carbide mechanical seal
• Cast iron volute and impeller

Features:

• Engine: Easy starting Honda OHV commercial GX120 engine
• Mechanical Seal: Durable silicon carbide seals for extended wear
• Impeller: Honda-designed 4 vane high efficiency impeller
• Volute: Rigid-mount cast iron volute for reduced case wear
• Frame: Heavy duty full frame protection with tie-down capability
• Mounting: Isolation mounted engine and pump to minimize vibration
• Oil Alert: Protected by Honda Oil Alert® system
• Strainer: Large strainer allows up to 8 mm (5/16 in.) solids to pass through

Specification:

• Engine GX120
• Displacement 118cc
• Bore and stroke 2.4" x 1.7"
• Compression Ratio 8.5:1
• Oil Alert Std
• Pump Type Centrifugal, Self-priming
• Volute Rigid Mounted Cast Iron
• Impeller 4 Vane Cast Iron
• Mechanical Seal (Pump case / impeller) Silicon Carbide/Silicon Carbide
• Priming time 110 sec @ 16.4 ft.
• Drive system Direct
• Discharge capacity 164 gal/min
• Suction port diameter 2" NPT
• Discharge port diameter 2" NPT
• Total head lift 105 ft.
• Suction head lift 25 ft.
• Maximum pressure 45 psi
• Solids handling N/A
• Dimensions (LxWxH) 19.3" x 14.4" x 16.5"
• Dry weight 44 lb.
• Fuel Capacity 0.53 gal
• Run Time @ Max Discharge 1.7 hr
• Strainer Part # 78325-YG3-000
• Residential Warranty 24 months
• Commercial Warranty 12 months

Description:

1" general purpose pump

• 32 gal./min capacity
• Weighs only 13 lbs.
• Garden hose adaptor, suction hose, clamps, and strainer included

Specifications:

• Engine: GX25, 25cc displacement, 1.4" x 1.0" bore and stroke, compression ratio 8.0:1
• Pump Type: General purpose Centrifugal Self-priming
• Volute: Aluminum
• Impeller: Aluminum
• Mechanical Seal (Pump case / impeller): Carbon/Ceramic
• Priming Time: 80 sec. at 16.4 ft.
• Drive System: Direct
• Discharge Capacity: 32 gal./min.
• Suction Port Diameter: 1.0" NPT
• Discharge Port Diameter: 1.0" NPT
• Total Head Lift: 121 ft.
• Suction Head Lift: 26 ft.
• Maximum Pressure: 52 psi
• Dimensions (LxWxH): 13.4" x 8.7" x 11.6"
• Dry Weight: 13 lbs.
• Fuel Capacity: 0.56 qt
• Run Time @ Max Discharge: 0.9 hr
• Strainer Part #: 78325-YB0-711
• Residential Warranty: 2 years
• Commercial Warranty: 1 year

Description:

Features:

• Easy Starting 49cc Honda GXH50 Mini 4-Cycle Engine
• Uses regular gasoline - no need to mix oil & gas
• OHV Design
• Provides excellent torque & fuel efficiency
• Incredibly quiet & virtually smoke-free
• Honda Oil Alert® Protection
• Alerts you or shuts engine down if oil reaches an unsafe level
• Aluminum Volute & Impeller
• Provides durability and reduces overall weight
• Carbon Ceramic Mechanical Seal
• Increased abrasion resistance and lower maintenance
• Lightweight Design
• Weighs only 20 lbs.
• Standard Transport Handle
• Makes this pump easy to move around
• Includes:
• Strainer
• Hose Clamps
• EPA & CARB Compliant
• 2-Year Residential Warranty & 1-Year Commercial Warranty

Specification:

Water Pump Specifications:

• Pump
• Gallons Per Minute: 74 GPM
• Inlet Diameter: 1-1/2 Inch
• Outlet Diameter: 1-1/2 Inch
• Self Priming: Yes
• Pump Head Material: Aluminum
• Pump Housing Drain: Yes
• Quick Clean Out: No
• Mechanical Seal Material: Ceramic Carbon
• Impeller Material: Aluminum
• Handles Solids: No
• Suction Head: 26 Feet
• Maximum PSI: 52
• Total Head Lift: 121 Feet
• Submersible: No
• Engine
• Engine Brand: Honda
• Starting System: Recoil Start
• Low Oil Shutdown: Yes
• Engine Cycles: 4-Cycle
• CC: 49 cc
• Fuel Tank Size: 0.2 Gallons
• Consumer Engine Warranty: 2 Years
• Commercial Engine Warranty: 1 Year

Product Overview:

• Weight: 20 Pounds
• Made in USA: No
• Consumer Warranty: 2 Years
• Commercial Warranty: 1 Year
• Product Dimensions:
• Length: 12.8 Inches
• Width: 10.8 Inches
• Height: 14.8 Inches
• UPC: 786102006620
• Additional Model Numbers: WX15, WX15TA

Accessories:

• Tool Kit: No
• Strainer: Yes
• Float Switch: No
• Hose Couplings: No
• Hose: Sold Separately
• Hose Bands: Yes
• Transport Handle: Yes
• Wheel Kit: No

Description:

The Raptor XDX is at the top of the residential zero-turn category. It has commercial-grade features like a 10-gauge fabricated deck, cast steel deck hangers, vented and toolless removable pulley covers, and reaches up to 8mph with Hydro-Gear® ZT-3100® commercial transmissions. The 5-inch-deep deck allows the XDX to mow through thick grass at top speeds. The heavy-duty XDX is backed by an industry leading 3yr / 300hr warranty and 1yr / 300hr commercial warranty.

 Key Features

• 21.5hp, 23hp & 24hp Kawasaki Engines
• 48", 54" & 60” decks
• 8mph mowing speed
• 3-year / 300 hour limited warranty
•  Commercial Grade Deck
• Heavy-duty 11 gauge steel and front bull nose bumper design for unmatched durability. Up to 60” deck sizes available.
•  Extra High-back Seat
• A premium extra high-back seat with armrests.
•  22" BigBite™ Tires
• More aggressive tire to handle tough jobs.

Features:

• Welded Steel Deck: Fabricated from welded steel, enhancing durability and extending the mower's lifespan.
• Wider Stance: Designed to offer ample room, contributing to operator comfort during operation.
• SmoothTrak Steering: Precision control system enabling effortless trimming and maneuvering around obstacles.
• Bolstered Seat: Provides a comfortable ride with armrests and airflow to the back, ensuring operator comfort.
• Rubber Floor Mat: Standard on all Raptor models, minimizes vibration on the operator's feet, enhancing comfort during prolonged use.
• Fabricated Frame: Features a continuous one-piece 1½ inch by 3 inch welded tubular frame for structural integrity and robustness.
• Foot-Operated Deck Lift: Easily adjust the deck height between 1.5" - 4.5" with foot operation, facilitating customization during mowing.
• Easy to Service: Maintenance is simplified with features like the flip-up seat pan, removable floor pan, and vented pulley covers, ensuring easy access for servicing.
• Exclusive BigBite Rear Tires: Developed in collaboration with the tire manufacturer, offering enhanced traction and performance.
• Kawasaki® Power: Equipped with a V-Twin Kawasaki® Engine, providing reliable power for efficient operation.

Specification:

• Cutting Width: 60"
• Engine: Kawasaki FR730
• Engine Horsepower: 24 HP
• Transmission: Hydro-Gear ZT-3100® Dual Hydrostatic
• Fuel Capacity: 3 gallons
• Ground Speed (FWD): Up to 8 mph
• Cutting Height: 1.5" to 4.5"
• Front Tire Size: 13 x 6.5 inches
• Drive Tire Size: 22 x 11-10 BigBite™
• Warranty: 3 Year Warranty (Residential) or 1 Year Warranty (Commercial), 300 hour limit

Engine Details:

• Displacement: 726cc
• Cooling: Air Cooled
• Warranty: 3 Year Limited

Transmission Details:

• Type: Dual Hydrostatic
• Technology: Hydro-Gear ZT-3100®
• Warranty: 3 Year Limited

Additional Features:

• Steering: Integrated with steering levers
• Cutting Width: 60"
• Seat: Bolstered extra high-back seat with armrests and built-in lumbar support
• Front Tire Size: 13 x 6.5 inches
• Drive Tire Size: 22 x 11-10 BigBite™
• Weight: 710 lbs
• Height: 43.7 inches
• Length: 71.1 inches
• Width w/ Chute Up: 62.2 inches
• Tire-to-Tire Width: 48.6 inches
• Productivity (Acres per Hour): 3.88

Warranty:

• Residential: 3 Year/300 hour
• Commercial: 1 Year/300 hour

Bagging Systems:

• 60" Model: Powered 2-bag, 7.2 bushel capacity
• Dimensions: 92.3" (Width) x 69.2" (Height)

Description:

A commercial grade machine at the right price, the FasTrak series ticks a lot of boxes for business owners who demand more from their zero turn mower.

Boasting a long 4 year commercial warranty, 48" fabricated steel deck, commercial grade Kawasaki V-Twin engine and strong Hydro-Gear ZT-3200 transmissions, the FasTrak 48 offers plenty of bang for your bucks.

Safety is covered with standard roll over protection bar, while the seating position has been designed with operator comfort in mind.

The high back suspension seat with arm rests and well bolstered back cushion will have you stepping off fresh at the end of a long day!

The relatively small footprint for a commercial mower adds additional flexibility and access advantages compared to a larger machine, making this model suited to a wide variety of commercial mowing applications.

The FasTrak 48 will comfortable fit on a standard 7" x 5" trailer, for easy transportation and site access.

Specification:

Cutting Equipment & Features:

• Deck Width & Construction: 48 Inch 10 Gauge Fabricated Cutting Deck
• Blades & PTO: 3 Blades with electric PTO blade engagement
• Spindles: Aluminum with 11 gauge spindle mounts, 1" shaft, and double lip sealed ball bearings
• Cutting Height & Adjustment: 1.5" - 4.5" cutting range with foot-assisted deck height adjustment
• Optional Extras: Optional Mulch Kit, Optional Catcher Kit

Productivity & Capability:

• Ground Speed: 16 Km/h Ground Speed
• Acres per hour: 3.1 Acres per hour (Rating based on 80% efficiency to allow for real-world mowing conditions)
• Fuel Tank Capacity: 32 L
• Slope Capability: 15 Degrees

Power & Drive Train:

• Engine Type & Specifications: 22HP Kawasaki FT691V Engine. Air cooled. 726cc.
• Engine Warranty: 3 Year Engine Warranty
• Transmission Type & Specifications: Dual Hydro Gear ZT3200 Hydro Transmissions

Build & Chassis:

• Country of Manufacture: Made in the USA
• Chassis Construction: 1.5" x 3" Welded Tubular Steel Frame
• Roll Over Protection: Standard Roll Over Protection Bar
• Rear Wheels & Tires: 23" x 9.5" Rear Tires
• Front Wheels, Tires & Castors: 13" x 6.5" Front Tires

Comfort & Convenience:

• Seat Type: High Back Suspension Seat with Armrests
• Console Features: Cup Holder, Park Brake (Automatic Park Brake)
• Maintenance Access: Open rear design for easy engine maintenance
• Tow Hitch: Optional Tow Hitch

Dimensions:

• Minimum Trailer Size: 5 ft wide, 7 ft Long
• Length: 1948 mm
• Width (Chute up): 1270 mm (Chute up)
• Height (ROPS up & down): 1745 mm (ROPS up). 1156 mm (ROPS down)
• Weight: 413 kg

Description:

The new X-Ride is equipped with Custom Ride Technology, an isolated operator suspension platform designed to deliver a comfortable ride for the operator even while on rough terrain. The platform absorbs up to 4 inches of travel and has 5 levels of adjustability for the operator to find their comfort preference all while maintaining the stability on the mower. 

Specification:

• Stock Number: 944074
• Make: Hustler
• Series: X-Ride
• Model: X-Ride 60"
• Deck Size: 60"
• Horsepower: 34.5
• Main Category: Zero-Turn Mowers
• Deal: Hustler
• All Mowers: All Mowers
• Commercial or Residential: Commercial

Description:

The Dash XD is the big brother of the Dash. The upgrades include more deck sizes, a more bolstered seat, more horsepower with a Kawasaki engine, and larger BigBite™ rear tires. At this price point, the Dash XD’s beefy construction clearly separates it from other brands at this price point. This is a great replacement for an inefficient lawn tractor.

Features:

• 15hp & 18hp Kawasaki Engine
• 34", 42" & 48” decks
• 6mph mowing speed
• 2-year / 200 hour residential warranty
• Standard Engine Guard
• Stylish and strong engine protection comes standard.
• Premium Seat
• Bolstered with built-in lumbar support.
• 18" BigBite™ Rear Tires

Specification:

Engine:

• Manufacturer: Kawasaki FR541
• Horsepower: 15
• Displacement: 603cc
• Cooling: Air Cooled
• Warranty: 3 Year Warranty

Transmission:

• Type: Dual Hydrostatic
• Manufacturer: Hydro-Gear ZT-1800

Fuel Capacity: 2 Gallons

Ground Speed (Forward): Up to 6 mph

Deck:

• Cutting Width: 34"
• Cutting Height: 1.5" to 4.5"
• Deck Depth: 4.1"
• Deck Lift: Foot Operated
• Number of Blades: 2
• Blade Length: 16.75"
• Blade Tip Speed: 17,500
• Spindles: Aluminum with 3/4" shaft and triple protection sealed ball bearings
• Deck Engagement: Electric PTO Clutch
• Deck Material: 11 Gauge Steel
• Spindle Mounts: Reinforced 14 Gauge Steel
• Impact Trim Area: 1/4" x 3/4" Steel Bar

Construction:

• Frame: 1" x 2" Steel Tubing
• Front Axle: Fabricated with Sealed Ball Bearings
• Front Caster Wheel: Commercial Duty Steel Roller Bearings
• Front Caster Fork: Fabricated 1/4" Steel

General:

• Seat: Premium Bolstered Seat with Built-In Lumbar Support
• Cup Holder: Yes

Dimensions:

• Front Tire: 11x4
• Drive Tire: 18x6-8 BigBite
• Weight: 455 lbs
• Height: 40"
• Length: 65.5"
• Width with Chute Up: 37.5"
• Tire-To-Tire Width: 35"
• Acres Per Hour: 1.65

Warranty:

• Residential: 2 Year or 200 Hours. Second year covers parts only.

Description:

The FasTrak is the perfect mower to start your lawncare business, grow your lawncare business or mow residential large acreages like at a farm, ranch or place of business. The new additions include two USB ports, dual fuel tanks, rubber floor mat, frame tie-downs and cast deck hangers.

Specifications:

• Engine Manufacturer: Kawasaki FT691
• Engine Horsepower: 22
• Transmission: Hydro-Gear ZT-3200™
• Fuel Capacity: 8.5 gallons
• Ground Speed (Forward): Up to 10 mph
• Cutting Width: 54"
• Cutting Height: 1.5" to 4.5"
• Front Tire: 13 x 6.5-6
• Drive Tire: 23 x 11-10 BigBite™
• Warranty: 4 years or 750 hours

Description:

The FasTrak is the perfect mower to start your lawn care business, grow your lawn care business or mow residential large acreages like at a farm, ranch or place of business. The new additions include two USB ports, dual fuel tanks, a rubber floor mat, frame tie-downs, and cast deck hangers.

Features:

• Cast Deck Hangers: Engineered to enhance durability, ensuring prolonged usage and reliability.
• SmoothTrak™ Steering: Precision control system designed to facilitate trimming and maneuvering around obstacles with ease.
• Easy Serviceability: Maintenance is simplified with features like the flip-up seat pan, removable floor pan, and toolless removable pulley covers, making upkeep tasks straightforward and hassle-free.
• Magnetic Top Pin Deck Lift: Easily adjust the deck height between 1.5” to 4.5” using your foot, providing convenience and efficiency during operation.
• Welded Steel Deck: Constructed from durable 10-gauge welded fabricated steel, delivering robust performance and resilience to wear and tear.
• Dual Roto-Molded Fuel Tanks: Equipped with dual mechanical fuel gauges and boasting an 8.5-gallon fuel capacity, ensuring extended operation without frequent refueling.

Specifications:

• Cutting Width: 60"
• Engine: Kawasaki FT730
• Engine Horsepower: 24 HP
• Transmission: Hydro-Gear ZT-3200™ Dual Hydrostatic
• Fuel Capacity: 8.5 gallons
• Ground Speed (FWD): Up to 10 mph
• Cutting Height: 1.5" to 4.5"
• Front Tire Size: 13 x 6.5-6 inches
• Drive Tire Size: 23 x 11-10 BigBite™
• Warranty: 4 years or 750 hours

Engine Details:

• Displacement: 726cc
• Cooling: Air Cooled
• Warranty: 3 Year Limited

Transmission Details:

• Type: Dual Hydrostatic
• Technology: Hydro-Gear ZT-3200™
• Warranty: 3 Year Limited

Additional Features:

• Steering: Integrated with steering levers
• Seat: High-Back Suspension Seat
• Bagging System: 2-bag (Powered), 7.2 bushel capacity
• Bac-Vac: Powered, 8 bushel capacity

Dimensions:

• Weight: 944 lbs
• Height: 45.5" (ROPS down), 68.7" (ROPS up)
• Length: 76.7"
• Width w/ Chute Up: 61.1"
• Tire-to-Tire Width: 51.5"
• Productivity (Acres per Hour): 4.84

Bagging Systems Dimensions:

• 2-bag Capacity: 7.2 bushels
• Width: 98"
• Height: 69"

Bac-Vac Dimensions:

• Powered
• Capacity: 8 bushels
• Width: 88.75"
• Height: 69"

Description:

Hustler Raptor X model 939702 features a powerful Kawasaki FR651 an updated 54 IN Open Deck and Dual Hydrostatic HydroGear EZT transmission. Featuring a welded-steel deck, fabricated frame and Hustler’s exclusive SmoothTrak steering, this model delivers the best an exceptional value and wide cutting performance.

The legendary Raptor X packs all the performance and reliability Hustler is known for into a simple and durable design. Hustler Turf engineers their mowers to be maintenance and service friendly for the everyday homeowner. From the frame to the deck to our trademark steering, the Raptor X delivers a professional grade cut-quality for a perfectly manicured lawn. Husltler Turf put thousands of hours of R&D and testing into the Raptor Series, which is why it’s backed by an industry leading 3yr / 300hr warranty.

The Mower Shop strongly endorses the Raptor with Kawasaki engine and 54 IN cutting for homeowners with up to 1 acre of mowing.

Features:

• Kawasaki FR651 engine
• 54 IN Open Deck mowing
• Dual Hydrostatic HydroGear EZT transmission reaches speeds up to 6.5 mph
• Smooth operation and patented Automatic park brake
• Perfect for up to 1 acre of mowing

Specifications:

Engine:

• Manufacturer: Kawasaki FR651
• Horsepower: 21.5
• Displacement: 726cc
• Cooling: Air Cooled
• Warranty: 3 Year Warranty

Transmission:

• Type: Dual Hydrostatic
• Manufacturer: Hydro-Gear ZT-2200

Fuel Capacity: 3 Gallons

Ground Speed (Forward): Up to 7 mph

Deck:

• Cutting Width: 54"
• Cutting Height: 1.5" to 4.5"
• Deck Depth: 4.5"
• Deck Lift: Foot Operated
• Number of Blades: 3
• Blade Length: 18.50"
• Blade Tip Speed: 18,600
• Spindles: Aluminum with 1" shaft and double lip sealed ball bearings
• Deck Engagement: Ogura GT1.5
• Deck Material: Fabricated 11 Gauge Steel
• Spindle Mounts: Reinforced 7 Gauge Steel
• Impact Trim Area: 1/4" x 1" Steel Bar

Construction:

• Frame: 1.50" x 3" Steel Tubing
• Front Axle: Fabricated with Sealed Ball Bearings
• Front Caster Wheel: Sealed Ball Bearings
• Front Caster Fork: Fabricated 1/4" Steel

General:

• Seat: Premium Bolstered Mid-Back Seat with Armrests and Built-In Lumbar Support
• Cup Holder: Yes

Dimensions:

• Front Tire: 11x6
• Drive Tire: 18x10.5-8 BigBite
• Weight: 564 lbs
• Height: 40.8"
• Length: 70.6"
• Width with Chute Up: 58.6"
• Tire-To-Tire Width: 46.5"
• Acres Per Hour: 3.01

Warranty:

• Residential: 3 Year or 300 Hours

Description:

The Raptor® XD is the ideal zero-turn for homeowners with up to five acres of property. The up to 24hp Kawasaki® engine and 60-inch deck option makes the XD a premium lawn mower in the residential zero-turn category. Like all Raptors, we’ve spent decades and thousands of hours perfecting our durable fabricated decks that provide a crisp, clean cut-quality. Raptor XDs are backed by a 3yr / 300hr limited warranty.

Features:

• Welded Steel Deck
• Welded fabricated steel deck helps add durability and can extend the mower's life.
• Wider Stance
• Designed to provide ample room adding to the comfort for the operator.
• SmoothTrak Steering
• Precision control designed to help trim and maneuver easily around obstacles.
• Bolstered Seat
• Helps provide a comfortable ride with armrests and airflow to the back.
• Rubber Floor Mat
• Helps provide comfort by minimizing vibration on the operator's feet. Standard on all Raptor models.
• Fabricated Frame
• Continuous one-piece 1½ inch by 3 inch welded tubular frame.
• Foot-Operated Deck Lift
• Easily adjust the deck height between 1.5" - 4.5".
• Easy to Service
• Flip-up seat pan, removable floor pan, vented pulley covers.
• Exclusive BigBite Rear Tires
• We worked directly with the tire manufacturer on this design.
• Kawasaki® Power
• Powered by a V-Twin Kawasaki® Engine.

Specification:

Engine Specs:

• Manufacturer: Kawasaki FR691
• Horsepower: 23
• Displacement: 726cc
• Cooling: Air Cooled
• Warranty: 3 Year Warranty

Drive System:

• Type: Dual Hydrostatic
• Transmission: Hydro-Gear ZT-2800
• Fuel Capacity: 3 Gallons
• Ground Speed (FWD): Up to 7.5 mph
• Parking Brake: Patented Automatic

Deck:

• Cutting Width: 54"
• Cutting Height: 1.5" to 4.5"
• Deck Depth: 4.5"
• Deck Lift: Foot Operated
• Number of Blades: 3
• Blade Length: 18.50"
• Blade Tip Speed: 18,800
• Spindles: Aluminum with 1" shaft and double lip sealed ball bearings
• Deck Engagement: Ogura GT1.5
• Deck Material: Fabricated 11 Gauge Steel
• Spindle Mounts: Reinforced 7 Gauge Steel
• Impact Trim Area: 3/8" x 1" Steel Bar

Construction:

• Frame: 1.50" x 3" Steel Tubing
• Front Axle: Fabricated with Sealed Ball Bearings
• Front Caster Wheel: Sealed Ball Bearings
• Front Caster Fork: Fabricated 3/8" Steel

General:

• Seat: Premium Bolstered High-Back Seat with Armrests and Built-In Lumbar Support
• Cup Holder: Yes

Dimensions:

• Front Tire: 13x6.5
• Drive Tire: 20x12-12 BigBite
• Weight: 653 lbs
• Height: 43.7"
• Length: 71.1"
• Width with Chute Up: 58.5"
• Tire-To-Tire Width: 48.6"
• Acres Per Hour: 3.27

Warranty:

• Residential: 3 Year or 300 Hours